Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General advice:

Remove/Take off immediately all contaminated clothing.

Get medical advice/ attention if you feel unwell.

If inhaled:

Move the victim to fresh air.

In case of skin contact:

In case of contact, immediately flush skin with plenty of water.

In case of eye contact:

In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

If swallowed:

When swallowed accidentally, drink sufficient amounts of water and seek medical aid.

Most important symptoms and effects, both acute and delayed

Symptoms:

No symptoms known currently.

Risks:

No hazards known at this time.

Indication of any immediate medical attention and special treatment needed

Treatment:

Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:

Water spray jet

Alcohol-resistant foam

Dry powder

Carbon dioxide (CO2)

Unsuitable extinguishing media:

High volume water jet

Special hazards arising from the substance or mixture

Specific hazards during firefighting:

In case of fires, hazardous combustion gases are formed:

Carbon monoxide (CO)

Carbon dioxide (CO2)

Advice for firefighters

Special protective equipment for firefighters:

Self-contained breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Personal precautions:

Wear suitable protective equipment.

Environmental precautions

The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up

Methods for cleaning up:

Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water

Handling and storage

Precautions for safe handling

Advice on safe handling:

No special measures necessary if stored and handled as prescribed.

Advice on protection against fire and explosion:

Observe the general rules of industrial fire protection

Hygiene measures:

Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing and wash it before reuse.

Conditions for safe storage, including any incompatibilities

Further information on storage conditions:

Keep container tightly closed. Sensitive to frost - In case of the product becoming opaque, thickening, crystalline or being frozen due to the effects of cold, it has to be slowly warmed up to approx. 50°C and homogenized. After a short stirring time the product is once again ready for use.

Specific end use(s)

Specific use(s):

No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International Bulk Chemicals Code):
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Exposure controls

Personal protective equipment

Eye protection:

Safety glasses

Hand protection

Break through time:

480 min

Glove thickness:

0,7 mm

Remarks:

Long-term exposure Impervious butyl rubber gloves

Break through time:

30 min

Glove thickness:

0,4 mm

Remarks:

For short-term exposure (splash protection): Nitrile rubber gloves.

Remarks:

These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Protective measures:

Observe the usual precautions for handling chemicals.

Stability and reactivity

Reactivity

See section "Possibility of hazardous reactions"

Chemical stability

Stable

Possibility of hazardous reactions

Hazardous reactions:

No dangerous reaction known under conditions of normal use.

Conditions to avoid

None known.

Incompatible materials

Materials to avoid:

not known

Hazardous decomposition products

Carbon monoxide and carbon dioxide

Disposal considerations

Waste treatment methods

Product:

In accordance with local authority regulations, take to special waste incineration plant

Contaminated packaging:

Packaging that cannot be cleaned should be disposed off as product waste