Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 249-530-6 | CAS number: 29240-17-3
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
General advice:
Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
If inhaled:
If breathed in, move person into fresh air.
Consult a physician after significant exposure.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Rinse immediately with plenty of water.
If skin irritation persists, call a physician.
In case of eye contact:
Rinse with plenty of water.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms:
The symptoms and effects are as expected from the hazards as shown in section 2. No specific product related symptoms are known.
Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Unsuitable extinguishing media:
High volume water jet
Special hazards arising from the substance or mixture
Specific hazards during firefighting / Specific hazards arising from the chemical:
CAUTION: reignition may occur.
Supports combustion.
Do not use a solid water stream as it may scatter and spread fire.
Water spray may be ineffective unless used by experienced firefighters.
Do not allow run-off from fire fighting to enter drains or water courses.
Heating may cause decomposition with release of toxic fumes.
Combustion products:
Fire will produce smoke containing hazardous combustion products (see section 10).
Advice for firefighters
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus.
Further information:
Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions:
Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Environmental precautions:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and materials for containment and cleaning up
Methods for cleaning up / Methods for containment:
Keep wetted with water.
Soak up with inert absorbent material and dispose of as hazardous waste.
Confinement must be avoided.
Never return spills in original containers for re-use.
Reference to other sections
Additional advice:
For personal protection see Exposure Controls/Personal Protection.
Handling and storage
Precautions for safe handling
Advice on safe handling:
For personal protection see Exposure Controls/Personal Protection.
Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Smoking, eating and drinking should be prohibited in the application area.
Open drum carefully as content may be under pressure.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion:
Use explosion protected equipment.
Keep away from sources of ignition - No smoking.
No sparking tools should be used.
Keep away from reducing agents (e.g. amines), acids, alkalies and heavy metal compounds (e.g. accelerators, driers, metal soaps).
Do not cut or weld on or near this container even when empty.
Keep away from combustible material.
Temperature class:
It is recommended to use electrical equipment of temperature group T3. However, autoignition can never be excluded.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Prevent unauthorized access.
No smoking.
Observe label precautions.
Electrical installations / working materials must comply with the technological safety standards.
Keep only in original container.
Store away from other materials.
Storage temperature:
For maximum quality: -10 °C
Minimum storage temperature:
Avoid temperatures below: -30 °C
Maximum storage temperature:
-10 °C
Other data:
If product freezes or separates, contact Akzo Nobel
No decomposition if stored and applied as directed.
Specific end use(s)
Specific use(s):
Consult the technical guidelines for the use of this substance/mixture.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN 3113
Shippingopen allclose all
Special provisions / remarks
- Special provisions:
- Control temperature: 10 oC
Emergency temperature: 15 oC
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN 3113
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Control temperature: 10 oC
Emergency temperature: 15 oC
Marine transport (UN RTDG/IMDG)
- UN number:
- UN 3113
Shipping information
- Proper shipping name and description:
- Organic Peroxide Type C, Liquid, Temperature Controlled (tert-amyl peroxypivalate)
- Chemical name:
- tert-amyl peroxypivalate
- Labels:
- 5.2
Special provisions / remarks
- Remarks:
- Control temperature: 10 oC
Emergency temperature: 15 oC
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- not permitted
Shipping information
- Proper shipping name and description:
- not permitted
- Chemical name:
- not permitted
- Labels:
- not permitted
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
Engineering controls
Explosion proof ventilation recommended.
Effective exhaust ventilation system
Personal protective equipment
Respiratory protection:
In the case of vapour or aerosol formation use a respirator with an approved filter.
Filter A
Hand protection:
butyl-rubber
Neoprene
Eye protection:
Tightly fitting safety goggles
Skin and body protection:
Protective suit
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.
Wash contaminated clothing before re-use.
Environmental exposure controls
General advice:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Stability and reactivity
Reactivity
Stable under normal conditions.
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
Conditions to avoid
Conditions to avoid:
Confinement must be avoided.
Heat, flames and sparks.
Incompatible materials
Materials to avoid:
Contact with incompatible materials will result in hazardous decomposition.
For queries regarding the suitability of other materials please contact the supplier.
Do not mix with peroxide accelerators, unless under controlled processing.
Use only stainless steel 316, PP, polyethylene or glass-lined equipment.
Acids and bases
Iron
Copper
Reducing agents
Heavy metals
Rust
Hazardous decomposition products
Hazardous decomposition products:
Isobutane
Ethylene
Butane
tert-Amyl alcohol
Methyl ethyl ketone
Acetone
Propane
Methane
Carbon oxides
Isobutylene
Pivalic acid
3,3,4,4-Tetramethylhexane
Thermal decomposition:
SADT - (Self accelerating decomposition temperature) is the lowest temperature at which self accelerating decomposition may occur with a substance in the packaging as used in transport. A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused by thermal decomposition at and above the SADT. Contact with incompatible substances can cause decomposition below the SADT.
Self-Accelerating decomposition temperature (SADT):
25 °C
Disposal considerations
Waste treatment methods
Product:
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Hazardous waste
Dispose of contents/container in accordance with local regulation.
Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not burn, or use a cutting torch on, the empty drum.
Due to the high risk of contamination recycling/recovery is not recommended.
Follow all warnings even after the container is emptied.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
