Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
REACH
Reaction mass of Terpenes and Terpenoids, turpentine-oil, limonene fraction, 1-methyl-4-(1-methylethenyl)cyclohexene and turpentine-oil beta-pinene fraction terpenes, dimers and Terpenes and Terpenoids, turpentine-oil, limonene fraction, 1-methyl-4-(1-methylethenyl)cyclohexene and turpentine-oil beta-pinene fraction terpenes, trimers
EC number: 947-783-3 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.
Inhalation: Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact: Wash off with soap and water. Get medical attention if irritation develops and persists.
Eye Contact: Rinse with water. Get medical attention if irritation develops and persists.
Ingestion: Rinse mouth. Get medical attention if symptoms occur.
Inhalation: Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact: Wash off with soap and water. Get medical attention if irritation develops and persists.
Eye Contact: Rinse with water. Get medical attention if irritation develops and persists.
Ingestion: Rinse mouth. Get medical attention if symptoms occur.
Fire-fighting measures
General fire hazards: No unusual fire or explosion hazards noted.
Suitable extinguishing media: Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.
Special hazards arising from the substance or mixture: During fire, gases hazardous to health may be formed. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Advice for firefighters Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment for firefighters: Wear suitable protective equipment. Move containers from fire area if you can do so without risk.
Specific methods: Use standard firefighting procedures and consider the hazards of other involved materials.
Suitable extinguishing media: Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.
Special hazards arising from the substance or mixture: During fire, gases hazardous to health may be formed. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Advice for firefighters Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment for firefighters: Wear suitable protective equipment. Move containers from fire area if you can do so without risk.
Specific methods: Use standard firefighting procedures and consider the hazards of other involved materials.
Accidental release measures
For non-emergency personnel: Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained.
For emergency responders: Keep unnecessary personnel away.
Environmental precautions: Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground.
Methods and material for containment and cleaning up: Prevent product from entering drains.Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re-use.
appropriate protective equipment and clothing during clean-up. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained.
For emergency responders: Keep unnecessary personnel away.
Environmental precautions: Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground.
Methods and material for containment and cleaning up: Prevent product from entering drains.Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re-use.
Handling and storage
Precautions for safe handling: Provide adequate ventilation. Wear appropriate personal protective equipment. Avoid release to
the environment. Observe good industrial hygiene practices. Follow all SDS/label precautions even after container is emptied because they may retain product residues.
Conditions for safe storage, including any incompatibilities: Store in original tightly closed container. Keep containers closed when not in use. Store at ambient temperature and atmospheric pressure. Store away from incompatible materials (see Section 10 of the SDS).
Specific end use(s): Not available.
the environment. Observe good industrial hygiene practices. Follow all SDS/label precautions even after container is emptied because they may retain product residues.
Conditions for safe storage, including any incompatibilities: Store in original tightly closed container. Keep containers closed when not in use. Store at ambient temperature and atmospheric pressure. Store away from incompatible materials (see Section 10 of the SDS).
Specific end use(s): Not available.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Occupational exposure limits: No exposure limits noted for ingredient(s).
Biological limit values: No biological exposure limits noted for the ingredient(s).
Recommended monitoring procedures: Follow standard monitoring procedures.
General information: Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment.
Eye/face protection: Wear safety glasses with side shields (or goggles).
Hand protection: Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier.
Other: Wear suitable protective clothing.
Respiratory protection: in case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards: Wear appropriate thermal protective clothing, when necessary.
Hygiene measures: Always observe good personal hygiene measures, such as washing after handling the material
Hygiene measures and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Eye wash fountain and emergency showers are recommended.
Environmental exposure controls: Inform appropriate managerial or supervisory personnel of all environmental releases.
Biological limit values: No biological exposure limits noted for the ingredient(s).
Recommended monitoring procedures: Follow standard monitoring procedures.
General information: Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment.
Eye/face protection: Wear safety glasses with side shields (or goggles).
Hand protection: Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier.
Other: Wear suitable protective clothing.
Respiratory protection: in case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards: Wear appropriate thermal protective clothing, when necessary.
Hygiene measures: Always observe good personal hygiene measures, such as washing after handling the material
Hygiene measures and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Eye wash fountain and emergency showers are recommended.
Environmental exposure controls: Inform appropriate managerial or supervisory personnel of all environmental releases.
Stability and reactivity
Reactivity: The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability: Material is stable under normal conditions.
Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.
Conditions to avoid: Strong oxidising agents. Contact with incompatible materials.
Incompatible materials: Strong oxidising agents.
Hazardous decomposition products: Upon decomposition this product emits acrid dense smoke with carbon dioxide, carbon monoxide, water and other products of combustion.
Chemical stability: Material is stable under normal conditions.
Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.
Conditions to avoid: Strong oxidising agents. Contact with incompatible materials.
Incompatible materials: Strong oxidising agents.
Hazardous decomposition products: Upon decomposition this product emits acrid dense smoke with carbon dioxide, carbon monoxide, water and other products of combustion.
Disposal considerations
Residual waste: Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner.
Contaminated packaging: Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.
EU waste code: The Waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Disposal methods/information: Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches
with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations.
Special precautions: Dispose in accordance with all applicable regulations.
Contaminated packaging: Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.
EU waste code: The Waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Disposal methods/information: Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches
with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations.
Special precautions: Dispose in accordance with all applicable regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
