Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 282-773-6 | CAS number: 84418-61-1
Guidance on Safe Use
Administrative data
First-aid measures
Note precautions for self-protection of first-aider. Remove contaminated clothing. Take affected persons out of the danger area and lay down.
If inhaled:
If inhaled, remove to fresh air.
On skin contact:
Wash with plenty cold water and soap. Remove and launder contaminated clothing.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion:
Make victim drink plenty of water. Consult doctor if feeling unwell. Do not induce vomiting.
Note to physician:
Treat according to symptoms.
Fire-fighting measures
Water mist, dry extinguishing media, foam, carbon dioxide (CO2)
Extinguishing media which must not be used for safety reasons:
For safety reasons do not use full water jet.
Specific Hazards:
Formation of harmful fumes. Hazardous combustion products: (CO, CO2).
Special protective equipment for fire-fighters:
Fire fighters should be equipped with self-contained breathing apparatus to prevent contact with reaction products.
Special protective equipment:
Do not stay in dangerous zone without self-contained breathing apparatus. In order to avoid contact
With skin, keep a safety distance and wear suitable protective clothing.
Further information:
Contaminated extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Avoid substance contact. Ensure supply of fresh air in enclosed rooms. Ensure adequate ventilation.
Environmental precautions:
Do not allow to enter drains, sewerage system. Cover drains. Collect, bind and pump of spills.
Methods for cleaning up:
Contain with adsorbent material and dispose. Avoid generation of dust during cleaning and disposal.
Handling and storage
Ensure thorough ventilation of stores and work areas. If handling large quantities without ventilation use respiratory protection.
Steer thoroughly before use.
Protection against fire and explosion:
Take precautionary measures against static discharge.
Storage:
Keep tightly sealed. LGK 10- 13
Protect against temperatures below 15 °C. Protect against light.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- UMWELTGEFÄHRDENDER STOFF, FLÜSSIG, N.A.G. (enthält: IMIDAZOLE POLYMER)
- Language:
- German
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- UMWELTGEFÄHRDENDER STOFF, FLÜSSIG, N.A.G. (enthält: IMIDAZOLE POLYMER)
- Language:
- German
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
(contains: IMIDAZOLE POLYMER)
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
(contains: IMIDAZOLE POLYMER)
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Components with workplace control parameters: None.
Personal protective equipment:
General safety and hygiene measures:
The usual precautions for the handling with chemicals must be observed. Keep away from food and beverage. Wash hands before breaks and after finishing work. Avoid contact with eyes and skin.
Respiratory protection:
Only in case of poor ventilation use Filter P 2 or FFP 2 (DIN 3181).
Hand protection:
Protective gloves made of Butyl rubber
For continuous exposure.
Material: Butyl rubber Breakthrough time: >240 Min
Layer thickness 0.6 mm
For short time exposure.
Material: Butyl rubber Breakthrough time: > 30 Min
Layer thickness 0.4 mm
Breakthrough time of Glove material: The stated breakthrough time has to be inquired from the Glove manufacturer/supplier and has to be followed strictly.
Protective gloves need to be replaced immediately after first signs of wear and tear are noticed.
Eye protection:
If used, use shields according to EN 166.
Stability and reactivity
Stable
Substances to avoid:
Strong acids and/or alkaline and oxidising agent.
Hazardous reactions:
Non, if processed according to the intended use.
Hazardous decomposition products:
Carbon dioxide CO2, Carbon monoxide CO, Nitrogen oxies NOx
Conditions to be avoided:
Non, if processed according to the intended use.
Disposal considerations
Must be disposed of in accordance with local regulations.
Contaminated packaging:
Uncontaminated packs can be reused.
Pack that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
