Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Eye contact:
In case of contact, flush eyes with plenty of water for at least 15 minutes, lifting upper and lower lids occasionally. Remove contact lenses, if present and easy to do. Get medical attention.

Skin contact:
Where appropriate gloves. In case of contact to material in wet form, rinse skin with copious amounts of water for 15 minutes an then wash skin with mild soap and water. Immediately remove contaminated clothing and shoes and launder before reuse. Get medical attention.

If symptoms of lung irritation occur (coughing, wheezing or breathing difficulty), remove from exposure area to fresh air immediately. If breathing has stopped, perform emergency resuscitation. Keep affected person warm and at rest. Do not leave person unattended. Get medical attention.

If swallowed, and person is conscious, immediately rinse mouth with water. Get medical attention. Never give anything by mouth to an unconscious or convulsing person. DO NOT induce vomiting. If spontaneous vomitting occurs, keep head below hips to avoid aspitation into lungs.

Note to physician:
Use general supportive care.

Fire-fighting measures

Unusual fire and explosive hazards: None known

Extinguishing media:
Water, sand, dry chemical, foam, or CO2. Use extinguishing media appropriate for surrounding materials.

Protection for firefighters:
Wear self-contained breathing apparatus to avoid breathing of irritant fumes (NIOSH approved SCBA & full protective equipment). Wear protective clothing and equipment to prevent contact with the material. Fire may be fought, but only from safe fire-fighting distance. Evacuate persons from immediate area of fire.

Accidental release measures

Wear protective equipment. Keep unprotected persons away. Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation.
Use HEPA vacuum to clean up any spill. If material is wet use neutralizing agent. Do not allow product to enter drains. Avoid contact with water since corrosive nature of material increases. Keep in suitable, closed containers for disposal.

Handling and storage

Avoid formation of dust and aerosols. Ensure good ventilation at the workspace.

Store in cool, dry conditions in well sealed containers.

Others: none.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls:
Use good gerneral local exhaust ventilation to prevent accumulation and remove mists, vapors, gases, or dusts. Provide local eye wash and safety shower stations.

Eye/face protection:
Avoid contact with eyes. Use ANSI approved chemical worker safety googles and face shield.

Skin protection:
Use chemical resitance slothing and gloves. In case of spill of wet material or slurry use PVC or Nitrile gloves of 15 mm (0.015 inch) or thicker.

Respiratory protection:
Avoid breathing dust. Engineering controls must be udes to reduce employees' exposure well under the Occupational Exposure Levels (OEL). If exposed to wet mist of the material, use NIOSH/MSHA approved Acid Gas Filter Mask of Self-Contained Breathing Apparatus. Respiratory protection must be provided in accordance with local regulations (e.g. OSHA 29 CFR 1910.134; CSA Standard Z94.4-M1982).

General hygiene considerations:
Use good hygiene practice. Wash hands after use and before drinking, eating or smoking. Launder contaminated clothing before reuse.

Stability and reactivity

Stability: Stable under recommended storage conditions (e.g. dry state)

Conditions to avoid: Avoid formation of dust and/or airborne mist.

Materials to avoid: None known.

Hazardous decomposition products: During combustion metal oxides, lithium hydroxide, lithium and hydrogen gas can be formed.

Hazardous polymerization: Will not occur.

Disposal considerations

Dispose in accordance with all local, regional, national, or international regulations. Disposal should be performed by permitted, professional disposal firma knowledgeable in local, regional and national requirements of hazardous waste treatment and hazardous waste transportation.