Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
21 August 2020
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.3 (Relative Density)
Version / remarks:
440/2008 of 30 May 2008
Deviations:
no
Qualifier:
according to guideline
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
Version / remarks:
2012
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Remarks:
Inspection date : 15-16 November 2017 ; Certificate date : 15 May 2018
Type of method:
pycnometer method
Key result
Type:
relative density
Density:
0.882
Temp.:
20 °C
Remarks on result:
other: (d20/4) without unit
Type:
density
Density:
0.882 g/cm³
Temp.:
20 °C

All measured values and the corresponding calculation results are given in the report. Results of the single determinations with the respective error as well as the mean value and its standard deviation are presented in the following tables:


Table 1 Results of Single Determinations




















DeterminationDensity in g/cm3Error of Determ. in g/cm3
10.88160.0000
20.88190.0000

Table 2 Results – Mean Values








































ParameterValue Unit Standard
Deviation
Relative Standard
Deviation
Volume of Pycnometer25.06cm30.00340.01%
Density of Test Item0.8818g/cm30.00020.02%
Density of Test Item881.8kg/m30.20.02%
Relative Density of Test Item0.8818 0.00020.02%

Note: All calculations are performed with unrounded values. Therefore, re-calculation with rounded values may lead to slightly different results.


The density of the test item was calculated as 0.8818 +/- 0.0002 g/cm3 at 20.0 +/- 0.2°C.


This value is the mean of two independent determinations +/- the standard deviation. Standard deviation shows very good correlation of the two determinations.

Conclusions:
The density of the test item was measured as 0.8818 +/- 0.0002 g/cm3 at 20.0 +/- 0.2°C.
The relative density (d20/4) of the test item was calculated as 0.8818.
Executive summary:

The density of test item was determined according to the OECD guideline No. 109 using the pycnometer method.


The density of the test item was measured as 0.8818 +/- 0.0002 g/cm3 at 20.0 +/- 0.2°C and the relative density (d20/4) of the test item was calculated as 0.8818. 


 

Description of key information

The density of the test item was measured as 0.8818 +/- 0.0002 g/cm3 at 20.0 +/- 0.2°C.
The relative density (d20/4) of the test item was calculated as 0.8818 (Less dense than water).

Key value for chemical safety assessment

Relative density at 20C:
0.882

Additional information

A fully reliable experimental study, conducted according to a recognized OECD/EC method and under GLP, is available. It is considered as a key study.