Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 941-492-5 | CAS number: -
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- no
- Specific details on test material used for the study:
- - Lot/batch No.: 407940
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Burning time:
- > 240 s
- Remarks on result:
- other: the flame extinguished by itself before reaching the reference mark of 200 mm
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- In a preliminary assay, it was observed that the propagation time for combustion over 200 mm was superior to 240 s. No further testing was required.
SEPISOL FAST YELLOW MG-F is not considered as highly flammable. - Executive summary:
A test to determine if Sepisol Fast Yellow MG-F is a flammable solid has been carried out according to the EU method A.10.
The test material is formed into a mould powder train of 250 mm length, 20 mm width and 10 mm height on a low heat-conducting base plate.
The powder train was ignited at one end with a micro burner (minimum diameter 5mm), ignition time of 2 minutes.
In a preliminary assay, it was observed, whether the combustion propagated over a distance of 200 mm within 4 minutes. If the time was longer than 4 minutes (240 s), no further testing was required according to guideline. It was observed that the propagation time was superior to 240 s. No further testing was required.
The sample was prepared under air, at room temperature.
It has been concluded that Sepisol Fast Yellow MG-F is not a highly flammable solid.
Reference
Description of key information
Regulation (EC) no 440/2008, Test method A.10 (Flammability (Solids))
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
