Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 248-374-6 | CAS number: 27253-32-3
Guidance on Safe Use
Administrative data
First-aid measures
4.1 Description of first aid measures
General advice
:
Move out of dangerous area. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended.
If inhaled
:
If unconscious, place in recovery position and get medical attention immediately.
In case of skin contact
:
If on skin, rinse well with water.
If on clothes, remove clothes.
Wash contaminated clothing before reuse.
In case of eye contact
:
Remove contact lenses.
Flush eyes with water as a precaution.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed
:
Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
4.2 Most important symptoms and effects, both acute and delayed
None known.
4.3 Indication of any immediate medical attention and special treatment needed
Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
:
Water mist
Water spray jet
Foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing media
:
High volume water jet
5.2 Special hazards arising from the substance or mixture
Hazardous combustion prod-ucts
:
Hazardous decomposition products due to incomplete com-bustion
Carbon oxides
5.3 Advice for firefighters
Special protective equipment for firefighters
:
Wear self-contained breathing apparatus for firefighting if nec-essary.
Further information
:
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
For safety reasons in case of fire, cans should be stored sepa-rately in closed containments.
Use a water spray to cool fully closed containers.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions
:
Material can create slippery conditions.
Sweep up to prevent slipping hazard.
Use personal protective equipment.
6.2 Environmental precautions
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform respective authorities.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
:
Contain spillage, and then collect with non-combustible ab-sorbent material, (e.g. sand, earth, diatomaceous earth, ver-miculite) and place in container for disposal according to local / national regulations (see section 13).
6.4 Reference to other sections
For personal protection see section 8.
Handling and storage
7.1 Precautions for safe handling
Advice on safe handling
:
Avoid formation of aerosol.
Do not breathe vapours/dust.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-plication area.
Provide sufficient air exchange and/or exhaust in work rooms.
Advice on protection against fire and explosion
:
Do not spray on a naked flame or any incandescent material. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). Keep away from open flames, hot surfaces and sources of ignition.
Hygiene measures
:
General industrial hygiene practice. Wash hands before breaks and at the end of workday.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
:
Store in cool place. Electrical installations / working materials must comply with the technological safety standards. To main-tain product quality, do not store in heat or direct sunlight.
Further information on stor-age stability
:
Keep in a dry place. No decomposition if stored and applied as directed.
7.3 Specific end use(s)
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.2 Exposure controls
Engineering measures
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Personal protective equipment
Eye protection
:
Wear safety glasses with side shields or goggles.
Hand protection
Material
:
Nitrile rubber
Break through time
:
> 480 min
Glove thickness
:
0,3 mm
Glove length
:
Long sleeve gloves
Skin and body protection
:
Footwear protecting against chemicals
Protective suit
Choose body protection in relation to its type, to the concen-tration and amount of dangerous substances, and to the spe-cific work-place.
Working clothes must not consist of textiles, which show a dangerous melting behaviour in case of fire.
Respiratory protection
:
In the case of vapour formation use a respirator with an ap-proved filter.
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.In the case of vapour formation use a respirator with an ap-proved filter.
Recommended Filter type:
ABEK-filter
Stability and reactivity
10.1 Reactivity
Stable at normal ambient temperature and pressure.
10.2 Chemical stability
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions
Hazardous reactions
:
Vapours may form explosive mixture with air.
Stable under recommended storage conditions.
10.4 Conditions to avoid
Conditions to avoid
:
Take measures to prevent the build up of electrostatic charge.
Heat, flames and sparks.Extremes of temperature and direct sunlight.
10.5 Incompatible materials
Materials to avoid
:
Oxidizing agents
10.6 Hazardous decomposition products
No decomposition if stored and applied as directed.
Disposal considerations
13.1 Waste treatment methods
Product
:
Dispose of in accordance with the European Directives on waste and hazardous waste.
According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.
Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.
Do not dispose of waste into sewer.
Do not contaminate ponds, waterways or ditches with chemi-cal or used container.
Send to a licensed waste management company.
Dispose of as hazardous waste in compliance with local and national regulations.
Contaminated packaging
:
Empty remaining contents.
Dispose of contaminated packaging as if unused product.
Do not re-use empty containers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
