Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

1. Description of first aid measures

Inhalation: N/A

Ingestion/Aspiration: If the affected person is conscious induce vomiting.

Seek medical care.

Contact skin: In case of contact with the product, wash the affected area with soap and hot water.

Contact eyes: In case of contact with the product, wash the affected area with soap and hot water.

Keep eyelids open and wash immediately with plenty of water for at least 15 minutes.

2. Most important symptoms and effects, both acute and delayed

Inhalation: N/A

Ingestion/Aspiration: The product may cause gastrointestinal disorders.

Contact skin: Contact with skin may cause irritation.

Contact eyes: Eye contact causes slight transient pain and irritation similar to that caused by a mild soap.

3. Indication of any immediate medical attention and special treatment needed

Seek medical care.

Fire-fighting measures

1. Extinguishing media

Suitable extinguishing media: Water spray, dry chemical powder and CO2.

Unsuitable extinguishing media: Water applied directly in jet stream may disperse the product.

2. Special hazards arising from the substance or mixture

Combustion products: CO2, H2O, CO (in the absence of oxygen).

Special measures: N/A

Special hazards: N/A

3. Advice for firefighters:

Clothing and gloves resistant to fire and SCBA.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures

Personal precautions: Prohibit entry of unnecessary personnel. Avoid prolonged contact with liquid product.

Personal protection: Wear suitable protective clothing, gloves, safety goggles or visors.

2. Environmental precautions

Isolate and remove discharged material.

Keep material away from water sources.

Do not allow material to reach drains and sewers.

3. Methods and material for containment and cleaning up

Small spills: Collect with dry sand or other non-combustible absorbent material and place into containers for later disposal.

Large spills: Dike far ahead of liquid spillage, and using vacuum equipment pump into containers for later disposal.

Handling and storage

1. Precautions for safe handling

General precautions: Wear suitable protective clothing, gloves, visors or safety goggles.

Do not smoke, drink, or eat during handling.

Do not handle damaged containers unless wearing appropriate protective equipment to avoid direct contact.

Good personal hygiene procedures must be observed.

Specific conditions: When filling or handling containers use appropriate waterproof suits, gloves, and shoes, and safety goggles or face-shields to prevent splashes.

Avoid contact with air during transfer of liquids, use pumps and connections grounded to prevent electrostatic charge.

Temperatures below 20°C cause increase in viscosity, which may complicate handling.

2. Conditions for safe storage, including any incompatibilities

Temperature and decomposition products: The product is stable under normal conditions. Dangerous reactions: N/A

Storage conditions: It must be stored in steel or polyethylene containers, properly labeled and closed, placed in cool, well ventilated areas.

Protect containers against the inclemencies of the weather.

3. Incompatible materials: Oxidizing substances. Specific end use(s)

See section 1 or exposure scenario

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
N/A
Shippingopen allclose all
Labels:
N/A
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
/
Shippingopen allclose all
Labels:
/
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
/
Shipping information
Proper shipping name and description:
/
Chemical name:
/
Labels:
/
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
/
Shipping information
Proper shipping name and description:
/
Chemical name:
/
Labels:
/
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Good local exhaust ventilation. Avoid prolonged contact with the liquid.

Individual protection measures, such as personal protective equipment

   Respiratory protection: N/A

   Skin protection: Gloves and appropriate clothing to avoid contact.

   Eye/face protection: Safety goggles or face-shields to prevent splashes.

   Other protective equipment: Showers and eye-washers in the work area.

Specific hygiene measures: Hot showers should be used. Use soap and no other solvents.

Medical Conditions Aggravated by Exposure: Dermatological problems.

   

Stability and reactivity

1. Reactivity: N/A

2. Chemical stability: Stable under normal conditions.

3. Possibility of hazardous reactions: Oxidizing substances.

4. Conditions to avoid: N/A

5. Incompatible materials: Oxidizing substances.

6. Hazardous decomposition products: N/A

Disposal considerations

Disposal: Send it to authorized waste or controlled incineration facilities. Recycle and recover

product if possible. Consult with authorized agencies.

Handling: Labeled and sealed containers. Avoid contact with skin.

Provisions: Establishments and companies which recover, dispose, store, transport or handle waste should comply with Dir. 2008/98/EC on waste, or other local, national or community provisions.

Categories Display