Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures


Call a physician immediately.


Remove to fresh air. If not breathing, give artificial respiration. Oxygen may additionally be given, by trained

personnel, if it is available. Get medical attention immediately.


Immediately start continuous flushing of skin with water for at least 15 minutes, while removing contaminated

clothing and shoes. Get medical attention immediately. Wash clothing before reuse. Thoroughly clean or

destroy contaminated shoes.


Immediately start continuous flushing of eyes with water for at least 15 minutes. If easy to do, contact lenses

should be removed during the flushing, by trained personnel. Hold the eyelids apart during the flushing to

ensure rinsing the entire surface of the eye and lids with water. Get medical attention immediately.


DO NOT induce vomiting. Get medical attention immediately by calling a physician or a poison control center. If

victim is conscious and alert, give a cupful of water. Never give anything by mouth to an unconscious or

convulsing person. If vomiting occurs, the patient should lie on their left side while vomiting to reduce the risk of


Fire-fighting measures

Extinguishing media

waterspray, foam, sand, dry chemical powder, CO2.

Unsuitable extinguishing media


Hazardous decomposition / combustion products

CO2, Carbon monoxide.

Propane, Propene.

Protective equipment

Firefighters must wear fire resistant protective equipment. Wear approved respirator and protective gloves.

Other information

Evacuate all non-essential personnel. Extinguish a small fire with powder or carbon dioxide then apply water to prevent

re-ignition. Cool closed containers with water. Water used to extinguish a fire should not be allowed to enter the

drainage system or water courses. After a fire, ventilate thoroughly the area and soak with water, clean the walls and

metallic surfaces.

Fire and explosion hazard

CAUTION: reignition may occur. Decomposition under effect of heating (See also Section Hazardous decomposition

products). If involved in a fire, it will support combustion. Vapors may form explosive mixtures with air. In case of fire

and/or explosion do not breathe fumes.

Accidental release measures

Personal precautions

Do not breathe fumes/vapor. Avoid contact with skin and eyes.

Methods and material for containment and cleaning up

Stop leakage if possible. Eliminate all sources of ignition, and do not generate flames or sparks. Take precautionary

measures against static discharges. Transfer remaining product from leaking container to a clean and suitable

container. Cover the remainder with inert absorbent (e.g. vermiculite) for disposal. Keep contents moist. The waste

should NOT be confined.

Handling and storage

Precautions for safe handling

Never weigh out in the storage room. When using do not eat, drink or smoke. Do not pipet by mouth. Do not breathe

fumes/vapor. Handle in well ventilated areas. Eliminate all sources of ignition, and do not generate flames or sparks.

Take precautionary measures against static discharges. Apply grounding when transferring from one container to

another. Keep away from reducing agents (e.g. amines), acids, alkalies and heavy metal compounds (e.g.

accelerators, driers, metal soaps). Keep product and emptied container away from heat and sources of ignition.

Confinement must be avoided. Avoid contact with skin and eyes.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Ensure good ventilation and local exhaustion of the working area. Explosion proof ventilation recommended.

Personal protection


In case of insufficient ventilation wear suitable respiratory equipment (respirator with Filter A).


Wear suitable protective gloves of neoprene or synthetic rubber.


Wear eye/face protection.

Skin and body

Wear suitable protective clothing.

Other information

Emergency-shower and facilities for rinsing eyes must be accessible. Launder clothes before reuse.

Stability and reactivity

Chemical stability

SADT - (Self accelerating decomposition temperature) is the lowest temperature at which self accelerating

decomposition may occur with a substance in the packaging as used in transport.

A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can

be caused by thermal decomposition at and above the following temperature: 0 °C. Contact with incompat ible

substances can cause decomposition at or below the SADT 0 °C.

To insure against possible exothermic self-accelerating decomposition, storage temperatures must not exceed

emergency temperature of -10 °C.

Conditions to avoid

Under no circumstances should this product be exposed to temperatures above the emergency temperature of

-10 °C. If the product temperature exceeds -10 °C a ll available means shall be used to bring the temperature

under control and the emergency procedures shall be started. Emergency procedures will vary depending on

conditions. Contact Akzo Nobel for assistance with developing an emergency response plan.

To maintain quality store in original closed container below: -20 °C.

Confinement must be avoided.

Incompatible materials

Avoid contact with rust, iron and Copper. Contact with incompatible materials such as acids, alkalies, heavy metals

and reducing agents will result in hazardous decomposition. Do not mix with peroxide accelerators. Use only Stainless

steel 316, PP, polyethylene or glass-lined equipment . Contact Akzo Nobel for more information.

Hazardous decomposition products

Hazardous decomposition products; Propane, Propene.

Other information

Emergency procedures will vary depending on conditions. The customer must have an emergency response plan in

place. Contact Akzo Nobel for assistance with developing an emergency response plan.

Disposal considerations

Waste disposal in accordance with

regulations (most probably controlled incineration).

Contaminated packaging

According to local regulations.

Other information

For further advice contact manufacturer.

Waste code number

Please refer to your specific industry in the European Waste Catalogue.