Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

General information

Remove soiled or soaked clothing immediately

After inhalation

When inhaled remove to fresh air and seek medical aid.

After contact with skin

In case of contact with skin wash off immediately with soap and water

After contact with eyes

In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion

Summon a doctor immediately.

- Most important symptoms and effects, both acute and delayed

Symptoms

No symptoms known currently.

Hazards

No hazards known at this time.

- Indication of any immediate medical attention and special treatment needed

Treatment

Treat symptomatically.

Fire-fighting measures

- Extinguishing media

Suitable extinguishing media

water spray jet

foam

carbon dioxide

dry powder

- Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

Nitrous gases (NOx)

Hydrogen chloride (HCl)

-. Advice for firefighters

Special protective equipment for firefighting

Use self-contained breathing apparatus

Accidental release measures

- Personal precautions, protective equipment and emergency procedures

Wear suitable personal protective equipment.

- Environmental precautions

Do not allow to enter drains or waterways

- Methods and material for containment and cleaning up

Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water

- Reference to other sections

Additional information

Information regarding Safe handling, see chapter 7.

Handling and storage

- Precautions for safe handling

Advice on safe handling

Open and handle container with care.

Advice on protection against fire and explosion

Observe the general rules of industrial fire protection

- Conditions for safe storage, including any incompatibilities

Further information on storage conditions

- sensitive to frost - If the product becomes opaque, thick or frozen owing to low

temperatures, allow to thaw at 30 - 40 °C and homogenize it.The product will then be suitable

for use.

- Specific end use(s)

No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
ADR
UN no. UN 3082

RID
UN no. UN 3082



Shipping information
Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Language:
English
Labels:
Hazard no. : 90
Special provisions / remarks
Remarks:
Shipment permitted

Inland waterway transport (UN RTDG/ADN(R))

UN number:
ADNR
UN no. UN 3082
Shipping information
Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Language:
English
Special provisions / remarks
Remarks:
Shipment permitted

Marine transport (UN RTDG/IMDG)

UN number:
IMDG
UN no. UN 3082


Shipping information
Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Marine pollutant
Special provisions / remarks
Remarks:
Shipment permitted

Air transport (UN RTDG/ICAO/IATA)

UN number:
IATA
UN no. UN 3082
Shipping information
Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Special provisions / remarks
Remarks:
Shipment permitted
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- General protective measures

Avoid contact with skin

Avoid contact with eyes

- Hygiene measures

Wash hands before breaks and after work.

Use barrier skin cream.

Remove soiled or soaked clothing immediately and clean thoroughly before using again.

- Hand protection : For long-term exposure:

Butyl rubber gloves

Minimum breakthrough time / gloves : 480 min

Minimum thickness / gloves 0,7 mm

For short-term exposure (splash protection):

Nitrile rubber gloves.

Minimum breakthrough time / gloves : 30 min

Minimum thickness / gloves 0,4 mm

These types of protective gloves are offered by various

manufacturers. Please note the manufacturers´ detailed

statements, especially about the minimum thickness and the

minimum breakthrough time. Consider also the particular

working conditions under which the gloves are being used.

- Eye protection : Depending on the risk, wear sufficient eye protection (safety

glasses with side protection or goggles, and if necessary, face

shield.)

Stability and reactivity

- Chemical stability

Under normal conditions the product is stable.

- Possibility of hazardous reactions

When handled and stored appropriately no dangerous reactions are known

-. Conditions to avoid

None known.

- Incompatible materials

not known

-. Hazardous decomposition products

Nitrous oxides (NOx)

Hydrogen chloride (HCl)

Disposal considerations

- Waste treatment methods

Product

In accordance with local authority regulations, take to special waste incineration plant

- Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste