Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 266-936-9 | CAS number: 67701-12-6 This substance is identified by SDA Substance Name: C14-C18 and C16-C18 unsaturated alkyl carboxylic acid zinc salt and SDA Reporting Number: 04-006-09.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Article service life
Documentsopen allclose all
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Pulp, paper and board industry
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- Pulp, paper and board industry
- Article category (AC):
- AC 8: Paper articles
- Related assessment:
- use not assessed
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Rubber manufacture and tire production
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Name of activity / technique:
- Rubber manufacture and tire production
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Name of activity / technique:
- Rubber manufacture and tire production
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use not assessed
Service life
- Article used by:
- workers
- Article category (AC):
- AC 8: Paper articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Construction chemicals
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Construction chemicals
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Related assessment:
- use not assessed
Service life
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- AC 8: Paper articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Coatings and inks
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Coatings and inks
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Related assessment:
- use not assessed
Service life
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
Service life
- Article used by:
- workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
- AC 02: Other (intended to be released):
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article category (AC):
- AC 8: Paper articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Polymer industry
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- Polymer industry
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Name of activity / technique:
- Polymer industry
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Related assessment:
- use not assessed
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
- AC 02: Other (intended to be released):
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
- Article category (AC):
- AC 02: Other (intended to be released):
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- yes
Contributing activity / technique for the environment
- Name of activity / technique:
- Pens, pencils, markers, modelling clay
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- Pens, pencils, markers, modelling clay
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
- Related assessment:
- use not assessed
Service life
- Article used by:
- workers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 10: Rubber articles
- AC 13: Plastic articles
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 10: Rubber articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile chemicals
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Name of activity / technique:
- Textile chemicals
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- Related assessment:
- use not assessed
Service life
- Article used by:
- workers
- Article category (AC):
- AC 10: Rubber articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- ETRMA - Tyres
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- ETRMA - Tyres
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use not assessed
Service life
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for consumers
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 8: Paper articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.

Route: .live2