Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice : If you feel unwell, seek medical advice (show the label where possible).
Inhalation: Remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if
necessary. Consult a physician.
Skin contact: Wash off immediately with soap and plenty of water. Consult a physician.
Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Ingestion: Do NOT induce vomiting. Call a physician immediately.

Fire-fighting measures

Suitable extinguishing media: Water spray, Dry powder, Foam, Carbon dioxide (CO2)

Accidental release measures

Personal precautions: Use personal protective equipment.
Environmental precautions: Should not be released into the environment.
Methods for cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). The material taken up
must be disposed of in accordance with regulations.

Handling and storage

Safe handling advice: Wear personal protective equipment. Handle and open container with care. Avoid contact with skin and eyes.
Advice on protection against fire and explosion: Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN3145
Shipping information
Proper shipping name and description:
ALKYLPHENOLS, LIQUID, N.O.S. (Dodecylphenol)
Chemical name:
Phenol, dodecyl-, branched
Language:
English
Labels:
8
Special provisions / remarks
Special provisions:
274
Remarks:
not available

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN3145
Shipping information
Proper shipping name and description:
ALKYLPHENOLS, LIQUID, N.O.S. (Dodecylphenol)
Chemical name:
Phenol, dodecyl-, branched
Language:
English
Labels:
8
Special provisions / remarks
Remarks:
not available

Marine transport (UN RTDG/IMDG)

UN number:
UN3145
Shipping information
Proper shipping name and description:
ALKYLPHENOLS, LIQUID, N.O.S. (Dodecylphenol)
Chemical name:
Phenol, dodecyl-, branched
Labels:
8
Marine pollutant
Special provisions / remarks
Remarks:
not available

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN3145
Shipping information
Proper shipping name and description:
Alkylphenols, liquid, n.o.s. (Dodecylphenol)
Chemical name:
Alkylphenols, liquid, n.o.s. (Dodecylphenol)
Labels:
8
Special provisions / remarks
Remarks:
not available

Additional transport information

Additional information
Special provisions / remarks / other:
(Environmentally Hazardous)
tunnel code: E

Exposure controls / personal protection

If possible, use material transfer/filling, metering and blending plants that are closed.
Respiratory protection: In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are
in use, or smoke and mist occur, use self-contained breathing apparatus or breathing apparatus with a type A filter or appropriate combined filter
(e.g. where aerosols are in use, or smoke and mist occur, A-P2 or ABEK-P2), in compliance with EN 141.
Hand protection: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the
gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the
contact time. Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time
measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact: Material: Nitrile rubber/nitrile latex; Break through time: >= 480 min; Material thickness: 0.35 mm
Material: butyl-rubber; Break through time: >= 480 min; Material thickness: 0.5 mm
gloves suitable for splash protection: Material: Natural rubber/natural latex; Break through time: >= 60 min; Material thickness: 0.5 mm
Eye protection: Tightly fitting safety goggles
Skin and body protection: Protective suit
Hygiene measures: Use barrier cream regularly. Provide adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.
Protective measures: Avoid contact with the skin and the eyes.

Stability and reactivity

Hazardous decomposition products: Stable under normal conditions.

Disposal considerations

Product: Can be incinerated, when in compliance with local regulations.

Categories Display