Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 296-719-4 | CAS number: 93028-28-5
Vapour pressure
Administrative data
Link to relevant study record(s)
- Endpoint:
- vapour pressure
- Type of information:
- (Q)SAR
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- The justification for use of QSAR is attached.
- Qualifier:
- according to guideline
- Guideline:
- other: QSAR
- Deviations:
- not applicable
- Principles of method if other than guideline:
- Quantitative Structural-Activity Relationship based upon chemical structure devised from the SMILES code
- GLP compliance:
- no
- Other quality assurance:
- other: ISO 9001
- Type of method:
- other: QSAR
- Key result
- Vapour pressure:
- 0 kPa
- Remarks on result:
- other: QSAR estimation, information on temperature are not available
- Conclusions:
- The vapour pressure is considered to be 3.47E-27 kPa based on calculation by the EPI modelling programme
- Executive summary:
Removal of mineral oil is not possible without degrading the chemical structureof the substance. It was therefore considered acceptable to create a weight of evidence approach based upon Quantitative Structural-Activity Relationship (QSAR). The QSAR model of choice was the EPI Suite v4.0 published by the United States Environmental Protection Agency, which has estimated the vapour pressure to be 3.47E-27 kPa
- Endpoint:
- vapour pressure
- Type of information:
- (Q)SAR
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- The justification for use of QSAR is attached.
- Qualifier:
- according to guideline
- Guideline:
- other: QSAR
- Deviations:
- not applicable
- Principles of method if other than guideline:
- Quantitative Structural-Activity Relationship based upon chemical structure devised from the SMILES code
- GLP compliance:
- no
- Other quality assurance:
- other: ISO 9001
- Type of method:
- other: QSAR
- Key result
- Vapour pressure:
- 0 kPa
- Remarks on result:
- other: QSAR estimation, information on temperature not available.
- Conclusions:
- The vapour pressure is considered to be 1.64E-028 kPa based on calculation by the EPI modelling programme
- Executive summary:
Removal of mineral oil is not possible without degrading the chemical structureof the substance. It was therefore considered acceptable to create a weight of evidence approach based upon Quantitative Structural-Activity Relationship (QSAR). The QSAR model of choice was the EPI Suite v4.0 published by the United States Environmental Protection Agency, which has estimated the vapour pressure to be 1.64E-028 kPa
- Endpoint:
- vapour pressure
- Type of information:
- (Q)SAR
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- The justification for use of QSAR is attached.
- Qualifier:
- according to guideline
- Guideline:
- other: QSAR
- Deviations:
- not applicable
- Principles of method if other than guideline:
- Quantitative Structural-Activity Relationship based upon chemical structure devised from the SMILES code
- GLP compliance:
- no
- Other quality assurance:
- other: ISO 9001
- Type of method:
- other: QSAR
- Key result
- Vapour pressure:
- 0 kPa
- Remarks on result:
- other: QSAR estimation, information on temperature not available.
- Conclusions:
- The vapour pressure is considered to be 7.62E-030 kPa based on calculation by the EPI modelling programme
- Executive summary:
Removal of mineral oil is not possible without degrading the chemical structureof the substance. It was therefore considered acceptable to create a weight of evidence approach based upon Quantitative Structural-Activity Relationship (QSAR). The QSAR model of choice was the EPI Suite v4.0 published by the United States Environmental Protection Agency, which has estimated the vapour pressure to be 7.62E-030 kPa
Referenceopen allclose all
Description of key information
Key value for chemical safety assessment
- Vapour pressure:
- 0 kPa
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
