Registration Dossier

Administrative data

First-aid measures

FIRST AID MEASURES
Description of first aid measures

Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation
persists: Get medical advice/attention.

Skin Contact : Wash with plenty water and soap. If skin irritation occurs: Get medical advice/attention.

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel
unwell.

Ingestion: Rinse mouth. Call a POISON CENTER or doctor/physician if you feel unwell.

Most important symptoms and effects, both acute and delayed: not available

Indication of any immediate medical attention and special treatment needed: no specific antidote. Supportive care. Treatment based on judgment of
physician in response to symptoms of patient.

Fire-fighting measures

FIRE - FIGHTING MEASURES

Extinguishing media : Carbon dioxide, foam, dry chemical or water spray

Unsuitable extinguishing media : Not known

Special hazards arising from the substance or mixture
Unusual Fire and Explosion Hazards : This product may evolve harmful and irritant gas and fume CO, CO2, NOx,SOX by heating or on combustion.

Advice for firefighters
Protective equipment : Wear self-contained breathing apparatus and complete protective equipment as it may evolve harmful and irritant gas/fume
such as CO, CO2, NOx, SOX or organic compounds in heating or combusting.

Other information : Move containers away from fire areas if it can be done without risk. If impossible to remove containers from fire zone, cool them
with water spray.

Accidental release measures

ACCIDENTAL RELEASE MEASURES

Personal precaution, protective equipment and emergency procedures: wear personal protective equipment. Avoid contact with eye, skin and clothing

Environmental precautions: Prevent this material from being entered into drains, ditches or rivers.

Methods and material for containment and cleaning up:
Sweep up, place in containers and holds for waste disposal. Use sand or soil to complete material pick-up if necessary. Wash out spill-site after
material pick-up is complete. Do not discharge waste water into environment unless permission has been obtained by the local authority and
suitable dilution has been established.

Handling and storage

HANDLING AND STORAGE

Precautions for safe handling:
Wear personal protective equipment.
Keep out of the reach of children.
Avoid raising dust.
Avoid contact with eye, skin and clothing and breathing dust.
Wash thoroughly after handling.

Conditions for safe storage, including any incompatibilities:
Keep in a cool dry place without direct sunlight.
Keep in container tightly closed.
Keep away from strong oxidizing agents and high temperature.

Specific end use:
Experimental Use Only

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters : TLV/ACGIH(2012) not listed

Exposure controls : Use general and/or local exhaust ventilation to control dusts.

Appropriate engineering controls Use general and/or local exhaust ventilation to control dusts. Provide safety showers and eyewashes.

Individual protection measures, such s personal protective equipment
(a) Eye protection : Safety goggles
(b) Skin protection : Suitable working clothes with long sleeves. Safety shoes
Hand protection : Gloves material ; e.g. outside Polyvinyl chloride, Polyethylene or Rubber inside Cotton , Rayon
(c) Respiratory protection : Appropriate respirator for organic dust
(d) Thermal hazards : None

Environmental exposure controls : Use general and/or local exhaust ventilation to control dusts.

Stability and reactivity

STABILITY AND REACTIVITY

Reactivity:
The specific test data of the reactivity hazards is not available. But this product is stable under normal conditions of storage and/or use.
This product colors by contact with acid.

Chemical stability:
Stable under normal and anticipated storage and handling conditions.

Possibility of hazardous reactions:
Hazardous polymerization does not occur.

Conditions to avoid:
High temperature

Incompatible materials:
Strong oxidizing reagent

Hazardous decomposition products:
This product may evolve toxic and irritant gas/fume such as CO, CO2, NOx, SOX in heating or fire.

Disposal considerations

DISPOSAL CONSIDERATIONS

Waste treatment methods:
1) Dissolve or mix the material with combustible solvent and burn in a chemical incinerator with alkaline scrubber.
2) Dispose of contents/container in accordance with local/regional/national/international regulations.