Sulfates of potassium, sodium and calcium, byproduct from fermentation

Viscosity

Administrative data

Endpoint:

viscosity

Data waiving:

study technically not feasible

Justification for data waiving:

the study does not need to be conducted because the substance is a solid

Cross-reference

Cross-reference 1

Reason / purpose for cross-reference:

data waiving: supporting information

Reference

Endpoint:

melting point/freezing point

Type of information:

experimental study

Adequacy of study:

key study

Study period:

27 april 2017

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Qualifier:

according to guideline

Guideline:

OECD Guideline 102 (Melting point / Melting Range)

Version / remarks:

adopted July 27, 1995

Deviations:

no

Qualifier:

according to guideline

Guideline:

EU Method A.1 (Melting / Freezing Temperature)

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Type of method:

capillary method

Specific details on test material used for the study:

SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: EXP LIberica Lote Al16503047
- Expiration date of the lot/batch: 30 November 2019
- Purity test date: 1 February 2017

STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Controlled room temperature (15-25 deg Celsius, below 70% relative humidity) protected from light and humidity
- Stability under test conditions: not specified
- Solubility and stability of the test substance in the solvent/vehicle:not specified

TREATMENT OF TEST MATERIAL PRIOR TO TESTING
The test item was ground to a fine powder before the application. Sufficient water was used to dampen the test material to ensure good contact with the skin.

Key result

Melting / freezing pt.:

> 400 °C

Atm. press.:

ca. 1 atm

Decomposition:

ambiguous

Remarks:

No melting point was observed up to 400ºC, but the colour of test item changed about 300ºC from initial light beige to grey.

Decomp. temp.:

ca. 300 °C

Conclusions:

No melting point was observed up to 400ºC, but the colour of test item changed about 300ºC from initial light beige to grey.

Executive summary:

The melting point of the test item was assessed with a GLP-compliant study, following the standardised guideline OECD TG 102, and EU method A.1 (capillary method). A small amount of the test item was heated in the electronic controlled sample block and the temperature around the sample was displayed. The sample was observed visually while raising the temperature. The initial and final melting temperatures were determined.

A preliminary test with three parallel samples was performed from 30°C to 400°C at 10°C/min heating rate.

For the main study three capillaries containing the test item were placed into the apparatus, the block was heated from 390°C to 400°C at 0.5°C/min heating rate. The transformations of the test item were observed, visually through the magnifying glass.

Three parallel experiments were carried out and in each case three parallel samples were measured.

No melting point was observed up to 400ºC, but the colour of test item changed about 300ºC from initial light beige to grey.

Cross-reference 2

Reason / purpose for cross-reference:

data waiving: supporting information

Reference

Endpoint:

appearance / physical state / colour

Type of information:

experimental study

Adequacy of study:

key study

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

other: Company's experience in handling and use. Safety Data Sheet

Qualifier:

according to guideline

Guideline:

other: Visual observation, company's experience in handling and use

Physical state at 20°C and 1013 hPa:

solid

Key result

Form:

solid: particulate/powder

Colour:

Beige powder

Odour:

odourless

Substance type:

inorganic