Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
water solubility
Type of information:
experimental study
Adequacy of study:
key study
Study period:
26 July 2018 - 21 August 2018
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Reason / purpose for cross-reference:
reference to same study
Qualifier:
according to guideline
Guideline:
EU Method A.6 (Water Solubility)
Version / remarks:
2016
Deviations:
no
Qualifier:
according to guideline
Guideline:
OECD Guideline 105 (Water Solubility)
Version / remarks:
1995
Deviations:
no
Qualifier:
according to guideline
Guideline:
EPA OPPTS 830.7840 (Water Solubility)
Version / remarks:
1998
Deviations:
no
GLP compliance:
yes
Type of method:
column elution method
Key result
Water solubility:
0.013 mg/L
Conc. based on:
test mat. (dissolved fraction)
Remarks:
based on Al analysis
Temp.:
20 °C
pH:
>= 7.4 - <= 7.5
Details on results:
Mean concentration in the water samples (n=10) obtained at the flowrate of 24 mL/h was 0.014 mg/L. CV = 8.3%.
Mean concentration in the water samples (n=10) obtained at the flowrate of 12 mL/h was 0.011 mg/L. CV = 6.8%.
The maximum difference on the mean values at both flow rates was ≤ 30% (i.e. 25%). Average of two flow rates: 0.013 mg/L.

The coefficient of variation (CV) (n=10) was ≤ 30% at both flow rates. It demonstrated that the system was in equilibrium at all flow rates.

The turbidity of the eluates was < 0.2 NTU. According to this, no undissolved particles were detected in the eluates.

No test item was detected in the samples from the blank column.

Conclusions:
The water solubility of the substance at 20°C was determined to be approximately 0.013 mg/L.
Executive summary:

The water solubility of the substance was determined using the column elution method in a GLP study according to EC A.6, OECD 105 and OPPTS 830.7840.

Quantification was performed by ICP-MS (based on Al). The water solubility of the substance at 20°C was determined to be approximately 0.013 mg/L (average of two flow rates - 24 mL/h and 12 mL/h, measured value is < LOQ of the method and obtained through extrapolation of the calibration curve).

The coefficient of variation (CV) (n=10) was ≤ 30% at both flow rates.

The maximum difference on the mean values at both flow rates was ≤ 30%.

The pH of the aqueous samples was 7.4 -7.5.

Description of key information

The water solubility of the substance at 20°C was determined to be approximately 0.013 mg/L.

Key value for chemical safety assessment

Water solubility:
0.013 mg/L
at the temperature of:
20 °C

Additional information

Determined in a GLP-compliant study according to EC A.6, OECD 105 and OPPTS 830.7840 using the column elution method.

The reported measured value is < LOQ of the method and was obtained through extrapolation of the calibration curve.

Therefore the reported water solubility should be regarded as an estimation.