Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 448-170-9 | CAS number: -
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Experiment start date - 20 May 2003; Experiment end date - 16 June 2003; Study completion date - 10 July 2003
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- air comparison pycnometer (for solids)
- Specific details on test material used for the study:
- Identity: FAT 40810/A
Batch: WP 6/02
Purity: approx. 75 %
Appearance: Solid, dark brownish powder
Expiration date: 12 December 2010
Storage: At room temperature at about 20 °C - Type:
- relative density
- Density:
- 1.66 g/cm³
- Temp.:
- 19.5 °C
- Remarks on result:
- other: 19.5 °C ± 0.1 °C
- Conclusions:
- The relative density of FAT 40810/A was determined to be 1.66 g/cm³.
- Executive summary:
The determination of the relative density of the test item was performed in accordance with the EEC Directive 92/69, Part A, Methods for the determination of physico-chemical properties, A.3 "Relative density" and the OECD Guideline for Testing of Chemicals, No. 109, "Density of Liquids and Solids" using a gas comparison pycnometer. The test was performed at a temperature of 19.5 °C ± 0.1 °C. The calibration procedure was performed in triplicate. The determination of the relative density of the test item was performed with two independent test item samples each at least measured in triplicate. The density of the test item FAT 40810/A was determined to be 1.66 g/cm³ at 19.5 °C using a gas comparison pycnometer.
Reference
Description of key information
The determination of the relative density of the test item was performed in accordance with the EEC Directive 92/69, Part A, Methods for the determination of physico-chemical properties, A.3 "Relative density" and the OECD Guideline for Testing of Chemicals, No. 109, "Density of Liquids and Solids" using a gas comparison pycnometer. The test was performed at a temperature of 19.5 °C ± 0.1 °C. The calibration procedure was performed in triplicate. The determination of the relative density of the test item was performed with two independent test item samples each at least measured in triplicate. The density of the test item FAT 40810/A was determined to be 1.66 g/cm³ at 19.5 °C using a gas comparison pycnometer.
Key value for chemical safety assessment
- Relative density at 20C:
- 1.66
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
