Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 270-171-6 | CAS number: 68412-15-7
Guidance on Safe Use
Administrative data
First-aid measures
- General advice:
Take off all contaminated clothing immediately. Show this safety data sheet to the doctor in attendance.
- Following inhalation:
Move to fresh air. If symptoms persist, call a physician.
- Following skin contact:
Wash off immediately with soap and plenty of water. If symptoms persist, call a physician.
- Following eye contact:
In case of eye contact, remove contact lens and rinse imme-diately with plenty of water, also under the eyelids, for at least 15 minutes.
Call a physician immediately
- Following ingestion:
Rinse mouth with water. Do NOT induce vomiting. Call a physician immediately.
- Most important symptoms and effects: no information available
Fire-fighting measures
- Suitable extinguishing media:
Carbon dioxide (CO2), Water spray jet, Dry powder, Foam
- Unsuitable extinguishing media:
High volume water jet
- Special hazards arising from the substance or mixture:
Hazardous decomposition products formed under fire conditions.
Can be released in case of fire: Carbon oxides
- Advice for fire fighter:
Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus.
Further information:
Use water spray to cool unopened containers.
In case of fire do not inhale smoke, conflagration gases and steams.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
- Personal precautions:
Use personal protective equipment. Contaminated surfaces will be extremely slippery.
- Protective equipment and emergency procedures:
- Environmental precautions:
- Methods and material for containment and cleaning up: Use mechanical handling equipment. Avoid dust formation. Dispose of in accordance with local regulations.
Handling and storage
- Precautions for safe handling:
Advice on safe handling:
No special handling advice required.
Advice on protection against fire and explosion:
Normal measures for preventive fire protection.
Keep away from heat and sources of ignition.
Hygiene measures:
Avoid contact with skin, eyes and clothing.
Do not breathe dust or spray mist.
Do not inhale fumes.
Take off all contaminated clothing immediately.
Handle in accordance with good industrial hygiene and safety practice.
- Conditions for safe storage, including any incompatibilities:
Requirements for storage areas and containers: Do always store in containers which correspond to the original ones.
Keep container tightly closed. Keep in a dry, cool place. Further information on stor-age conditions: Protect from temperatures over + 60 °C.
Keep away from heat and direct sunlight. Prevent formation of dust and deposition.
Advice on common storage: No special precautions required.
Storage class (TRGS 510): 11, Combustible Solids
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
1. Technical protection measures: Provide sufficient air exchange and/or exhaust in work rooms.
2. Organisational protection measures:
3. Hand protection: gloves
Material: Nitrile rubber
Break through time: > 480 min
Glove thickness: > 0,35 mm
Protective index: Class 6
Remarks: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other.
The obtained break through times according to EN 374 Part III are not measured under normal operating conditions. There-fore a maximum usage time of 50% of the break through time is recommended.
4. Feet protection: Wear suitable protective clothing.
5. Body protection: Wear suitable protective clothing.
6. Eye protection: Safety glasses
7. Respiratory protection: Breathing apparatus only if aerosol or dust is formed. Recommended Filter type: Combination filter A/P
Stability and reactivity
1. Reactivity
: No hazards to be specially mentioned.
2. Chemical stability:
The substance is chemically stable.
3. Possibility of hazardous reactions
: No dangerous reaction known under conditions of normal use.
4. Conditions to avoid
: Not applicable
5. Incompatible materials
: Not applicable
6. Hazardous decomposition products: No decomposition if stored and applied as directed.
Disposal considerations
Pay attention to local or official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
