Registration Dossier

Administrative data

First-aid measures

General advice
Take care of your own personal safety.
Take off all contaminated clothing immediately.
Move out of dangerous area.
Do not leave the victim unattended
Inhalation
Remove to fresh air.
Monitor breathing, give oxygen if necessary.
If symptom persists, consult a physician for treatment.
Skin contact
Wash off with plenty of water and soap, seek medical advice if necessary.
Eye contact
Rinse immediately with plenty of water, also under thy eyelids, for at least 15 minutes. Seek medical advice.
Ingestion
Aspiration hazard.
Do not induce vomiting and seek medical advice immediately.
Have the mouth rinsed with water.
Notes to physician
If the product has been swallowed or vomited danger of penetration in the lung (danger of aspiration).
Symptomatic treatment.

Fire-fighting measures

Suitable extinguishing media
Foam, CO2, dry powder.
Extinguishing media which must not be used for safety reasons
high volume water jet
Specific hazards during fire fighting
In case of fire cool endangered containers with water.
Closed container may rupture if strongly heated.
Formation of flammable or explosive vapour/air mixtures possible.
Keep away from sources of ignition - No smoking.
Special protective equipment for fire-fighters
In the case of respirable dust and/or fumes, use self-contained breathing apparatus.
Further information
Water used to extinguish fire should not enter drainage systems, soil, or stretches of water. Ensure there are sufficient retaining facilities for water used to extinguish fire. Contaminated fire-extinguishing water must be disposed of in accordance with the regulations issued by the appropiate local authorities. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions
Wear personal protective equipment; see section 8.
Avoid contact with skin and eyes.
Do not inhale vapours / aerosols.
Keep away from sources of ignition - No smoking.
Ensure sufficient ventilation.
Environmental precautions
Do not allow entrance in sewage water, drainage systems, stretches of water, soil.
Avoid penetration into drainage system or in rooms situated at a lower level because of danger of explosion.
Issue an immediate alarm report to the company environmental protection department if the product unintentionally leaves the production area.
Methods for cleaning up
Take up mechanically or with an absorbent material.
Fill into marked, sealable containers.

Handling and storage

Handling
Safe handling advice
Wear personal protective equipment; see section 8.
Avoid contact with skin and eyes.
Do not inhale vapours / aerosols.
Ensure sufficient ventilation.
Advice on protection against fire and explosion
Take precautionary measures against static charges, keep away from sources of ignition.
Ensure explosion proofness.
Storage
Keep container tightly closed in a cool, well-ventilated place.
Advice on common storage
Observe prohibition against storing together!

Transport information

Land transport (ADR/RID)

UN number:
1993
Shippingopen allclose all
Class:
3
Classification code:
33 / 1993
Packaging group:
II
Labels:
3
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
1993
Shippingopen allclose all
Class:
3
Packaging group:
II
Labels:
3
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1993
Proper shipping name and description:
Flammable liquid, n.o.s. (isononanol, octane)
Class:
3
Packaging group:
II
EmS code:
F-E, S-E
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
1993
Proper shipping name and description:
Flammable liquid, n.o.s. (isononanol, octane)
Class:
3
Packaging group:
II
Remarksopen allclose all

Additional transport information

Additional transport information
Tunnel Restriction Code (ADR)
(D/E)

Exposure controls / personal protection

Engineering measures
If possible, use material transfer/filling, metering and blending plants that are closed, or provide for local suction devices.
Occupational exposure controls
Further information
ACGIH (American Conference of Governmental Industry Hygienists)
Personal protective equipment
Respiratory protection
In case of dusts/vapours/aerosols being formed or if the limit values like TLV are exceeded:
use respiratory equipment with suitable filter (filter type A) or wear a self contained respiratory apparatus
Hand protection
Chemical-resistant protective gloves (EN 374)
When handling for a short time:
Glove material nitrile-butadiene rubber (NBR) gloves.
Selection of protective gloves to meet the requirements of specific workplaces.
Suitability for specific workplaces should be clarified with protective glove manufacturers.
The information is based on our own tests, references from the literature and information from glove manufacturers, or derived by analogy with similar materials.
Remember that the useful time per day of a chemical protection glove may be much shorter than the permeation time determined according to EN 374 due to the many different influential factors involved (e.g. temperature).
Eye protection
Tightly fitting protective goggles
Skin and body protection
Select materials and equipment for physical protection depending on the concentration and volume of hazardous substances and the workplace involved.
Hygiene measures
Avoid contact with skin and eyes.
Do not inhale vapours / aerosols.
Remove contaminated or saturated clothing.
Smoking, eating and drinking should be prohibited in the application area.
Wash hands before break and end of work.
Use barrier creme regularly.
Protective measures
Wear suitable protective clothing.

Stability and reactivity

Conditions to avoid
Keep away from heat and sources of ignition.
Formation of peroxids may occur (in the oresence of atmospheric oxygen).
Formation of flammable or explosive vapour/air mixtures possible.
Materials to avoid
strong oxidizing agents, strong acids, alkali metals

Hazardous decomposition products
In case of fire or thermal decomposition production of, carbon monoxide, carbon dioxide, Hydrocarbons

Thermal decomposition
Distills without decomposition at atmospheric pressure.

Hazardous reactions
Vapours may form explosive mixture with air.

Disposal considerations

Product
With respect to local regulations, e.g. dispose of to suitable waste incineration plant.
No waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer.
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.