Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information:

Take affected persons out of danger area and lay down.

Ingestion: Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, keep head lower than hips to prevent aspiration.

Skin: For skin contact, wipe away excess material with dry towel. Then wash affected areas with plenty of water, and mild soap if available, for several minutes. Get medical attention if irritation occurs. Remove contact lenses, if present and easy to do. Continue rinsing.

Inhalation: If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation develops or if breathing becomes difficult.

Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.

Notes to Physician: Treatment based on sound judgment of physician and individual reactions of patient.

Fire-fighting measures

Flash Point: > 250 °C

Method: COC

Flammable Limits in Air - Upper (%): Maximum % by volume of vapor in air above which propagation of flame does not occur on contact with a source of ignition: N/D

Sensitivity to Mechanical Impact (Y/N): NO

Sensitivity to Static Discharge (Y/N): Sensitivity to static discharge is not expected.

Extinguishing Media: Water fog, carbon dioxide, foam, dry chemical. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions

Special Firefighting Procedures:

Containers can build up pressure if exposed to heat (fire). Fire involving large amounts of material should not be approached because individual containers may rupture abruptly causing "fireball" effect. Fire-fighters should wear self-contained breathing apparatus and full protective clothing when fighting chemical fires. Use water spray to cool nearby containers and structures exposed to fire.

Accidental release measures

Action to be taken if material is released or spilled:

Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking surfaces with detergent and water to reduce slipping hazard. Wear proper protective equipment as specified in the protective equipment section. Large quantity spills should be contained and pumped into drums for recovery or disposal. Do not discharge into drains, surface water, or groundwaters.

Handling and storage

Precautions to be taken in handling and storage:

Keep container closed when not in use. Store in cool, dry conditions in well sealed receptacles. Good hygienic practices should be observed. Work clothes should be washed separately at the end of each work day. Disposable clothing should be discarded with material.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
Labels:
None
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Labels:
Not regulated
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shipping information
Proper shipping name and description:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shippingopen allclose all
Labels:
Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Controls: None required under normal conditions.

Personal Protection Equipment

Respiratory Protection: None required under normal conditions in a well-ventilated area.

Protective Gloves: Use gloves as a standard industrial handling procedure.

Eye and Face Protection: Wear safety glasses or goggles to protect against exposure.

Other Protective Equipment: None required under normal operating conditions.

Ventilation: Use in a well ventilated area. Wear respiratory protection equipment if vapors accumulate.

Stability and reactivity

Stability: Stable

Hazardous Polymerization: Will not occur.

Hazardous Thermal Decomposition / Combustion Products: No unusual decomposition products known.

Incompatibility (Materials to Avoid): No further relevant information available.

Conditions to Avoid: No further relevant information available.

Disposal considerations

Disposal Method: As local regulations may vary; all waste must be disposed/recycled/reclaimed in accordance with federal, state, and local environmental control regulations.