Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

- General advice: Take off all contaminated clothing immediately.
Show this safety data sheet to the doctor in attendance.
- Following inhalation: Move to fresh air. If symptoms persist, call a physician
- Following skin contact: Wash off immediately with soap and plenty of water. If symptoms persist, call a physician.
- Following eye contact: In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.
- Following ingestion: Rinse mouth with water. Do NOT induce vomiting. Call a physician immediately.

Fire-fighting measures

- Suitable extinguishing media: Carbon dioxide (CO2), Water spray, Dry powder, Foam
- Unsuitable extinguishing media: no information
- Special hazards arising from the substance or mixture:
Hazardous decomposition products formed under fire conditions.
Can be released in case of fire: Carbon oxides, Phosphorus oxides,
- Advice for fire fighter:
Special protective equipment:
In the event of fire, wear self-contained breathing apparatus.

Accidental release measures

- Personal precautions: Use personal protective equipment.
- Protective equipment and emergency procedures: Use personal protective equipment.
- Environmental precautions: The product should not be allowed to enter drains, water courses or the soil. Pay attention to local or official regulations.
- Methods and material for containment and cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Clean contaminated surface thoroughly. Dispose of in accordance with local regulations.

Handling and storage

- Precautions for safe handling: Provide sufficient air exchange and/or exhaust in work rooms.
- Advice on protection against fire and explosion: No special protective measures against fire required.
- Hygiene measures: Avoid contact with skin, eyes and clothing.
Do not breathe vapours, aerosols. Take off all contaminated clothing immediately.
Handle in accordance with good industrial hygiene and safety practice.

- Conditions for safe storage, including any incompatibilities:
Do always store in containers which correspond to the original ones.
Keep container tightly closed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Engineering measures
Solids with occupational exposure limits in liquid preparations do not cause an exposure in the workplace, because they are not present in a respirable form. Exposure can occur in the form of aerosols or after drying of the liquid the solids remain, possibly in a finely dispersed form.
Provide sufficient air exchange and/or exhaust in work rooms.
- Eye protection: Wear eye/face protection.
- Hand protection:
Material: PVC
Break through time: > 480 min
Glove thickness: >= 0.5 mm
Protective index: Class 6
Remarks: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other.
The obtained break through times according to EN 374 Part III are not measured under normal operating conditions. Therefore a maximum usage time of 50% of the break through time is recommended.

- Skin and body protection: Wear suitable protective clothing.
- Respiratory protection: In case the work place is not ventilated sufficiently and during spray processing, it is necessary to wear respiratory protective equipment.
Recommended Filter type: Combination filter A/P

Stability and reactivity

1. Reactivity: No hazards to be specially mentioned.
2. Chemical stability: The product is chemically stable.
3. Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.
4. Conditions to avoid: Not applicable
5. Incompatible materials: Not applicable
6. Hazardous decomposition products: No decomposition if stored and applied as directed.

Disposal considerations

Waste treatment methods:
Product: Pay attention to local or official regulations
Contaminated packaging: Pay attention to local or official regulations