Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 271-591-2 | CAS number: 68585-82-0
Water solubility
Administrative data
Link to relevant study record(s)
- Endpoint:
- water solubility
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 10 April - 21 June 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Reason / purpose for cross-reference:
- reference to other study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.6 (Water Solubility)
- Version / remarks:
- 2008
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 105 (Water Solubility)
- Version / remarks:
- 1995
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.7840 (Water Solubility)
- Version / remarks:
- 1998
- Deviations:
- no
- GLP compliance:
- yes
- Type of method:
- column elution method
- Water solubility:
- < 0.522 µg/L
- Conc. based on:
- other: Yttrium
- Temp.:
- 20 °C
- pH:
- >= 6.9 - <= 7
- Key result
- Water solubility:
- < 0.663 µg/L
- Conc. based on:
- other: Yttrium Oxide (Y2O3)
- Temp.:
- 20 °C
- pH:
- >= 6.9 - <= 7
- Details on results:
- Turbidity of the eluates was <0.2 NTU, thus no undissolved particles were detected in the eluates.
In all samples, a small Yttrium response was detected. This response was below the lowest calibration solution.
<0.522 µg/L yttrium was analysed at 12 and 24 ml/h flow rate with a pH of 6.9 and 7.0 respectively, with 0.5 µg/L being the lowest calibration solution. This is equivalent to < 0.663 µg/L yttrium oxide concentration.
The test substance signal in the samples from the blank column was below that of the lowest calibration standard. - Conclusions:
- The substance is insoluble in water. In a study according to current OECD/EC/EPA test guidelines, the water solubility was determined using the column elution method resulting in a water solubility of <0.663 µg/L, expressed as Yttrium Oxide (Y2O3).
Reference
Description of key information
The substance is insoluble in water. The water solubility was determined to be < 0.663 µg/L, expressed as Yttrium Oxide (Y2O3).
Key value for chemical safety assessment
- Water solubility:
- 0.663 µg/L
- at the temperature of:
- 20 °C
Additional information
Determined in a GLP-compliant study in accordance with OECD 105 (1995), using the column elution method. Analysis was performed on Yttrium, using ICP-MS.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
