Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 205-355-7 | CAS number: 139-13-9
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye
specialist.
On ingestion:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: Eye irritation, gastrointestinal complaints, kidney damage
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
Fire-fighting measures
Extinguishing media:
Suitable extinguishing media: dry powder, foam
Unsuitable extinguishing media for safety reasons: carbon dioxide
Additional information: Avoid whirling up the material/product because of the danger of dust explosion.
Special hazards arising from the substance or mixture:
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of
fire.
Advice for fire-fighters:
Special protective equipment: Wear a self-contained breathing apparatus.
Further information: The degree of risk is governed by the burning substance and the fire conditions. Contaminated
extinguishing water must be disposed of in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Avoid dust formation. Use personal protective clothing. Information regarding personal protective
measures see "Exposure controls / personal protection"
Environmental precautions:
Contain contaminated water/firefighting water. Do not discharge into drains/surface
waters/groundwater.
Methods and material for containment and cleaning up:
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Contain with dust binding material and dispose of.
Avoid raising dust.
Handling and storage
Precautions for safe handling
Provide exhaust ventilation. Avoid inhalation of dusts.
Protection against fire and explosion:
Avoid dust formation. Take precautionary measures against static discharges.
Conditions for safe storage, including any incompatibilities:
Suitable materials for containers: Low density polyethylene (LDPE), paper, board, High density
polyethylene (HDPE)
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters:
Components with workplace control parameters: No occupational exposure limits known.
Exposure controls: Personal protective equipment:
Respiratory protection:
Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with medium
efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6,
corresponding > 480 minutes of permeation time according to EN 374):
e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other
Supplementary note: The specifications are based on tests, literature data and information of glove
manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.
temperature) it must be considered, that the practical usage of a chemical-protective glove in practice
may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work
clothing is recommended.
Stability and reactivity
Disposal considerations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
