Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
density, other
Remarks:
density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Up to 2008
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: Non-GLP, non-guideline, Information from published handbook, acceptable with restrictions.
Principles of method if other than guideline:
The use of secondary sources of data is acceptable when they are based on a critical evaluation of peer-reviewed data and a consequent selection of a reliable and representative value for the property under investigation. The introduction to the CRC Handbook of Chemistry and Physics states that data for physical constants have been taken from many sources, including both compilations and the primary literature. Where conflicts were found, the value deemed most reliable was chosen. Therefore, although the method used is not known, the values presented here are acceptable as they are from a reliable secondary source of phys chem. data.
GLP compliance:
not specified
Remarks:
No data reported
Type of method:
other: No data reported
Specific details on test material used for the study:
N/A
Dynamic viscosity of test material:
N/A
Key result
Type:
density
Density:
0.57 g/cm³
Temp.:
25 °C
Remarks on result:
other: Pressure >1 atm

N/A

Conclusions:
The density of butane is 0.573 g/cm^3 at 25°C.
Executive summary:

The density of butane is 0.573g/cm3 at 25˚C. This information is taken from a reliable peer reviewed handbook and so can be considered reliable and suitable for use as the key study for this endpoint.

Endpoint:
density, other
Remarks:
density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Up to 2008
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: GLP status not known, guideline not known, information from a published handbook, acceptable with restrictions.
Principles of method if other than guideline:
The use of secondary sources of data is acceptable when they are based on a critical evaluation of peer-reviewed data and a consequent selection of a reliable and representative value for the property under investigation. The introduction to the CRC Handbook of Chemistry and Physics states that data for physical constants have been taken from many sources, including both compilations and the primary literature. Where conflicts were found, the value deemed most reliable was chosen. Therefore, although the method used is not known, the values presented here are acceptable as they are from a reliable secondary source of phys chem.
GLP compliance:
not specified
Type of method:
other: Method not known
Specific details on test material used for the study:
N/A
Dynamic viscosity of test material:
N/A
Key result
Type:
density
Density:
0.545 g/cm³
Temp.:
-89 °C
Remarks on result:
other: Liquid ethane

N/A

Conclusions:
The density of liquid ethane at -89˚C is 0.545 g/cm^-3.
Executive summary:

No information on the primary source of the data or the methods used is available. However, this information is taken from a reliable peer reviewed handbook and so can be considered reliable and suitable for use as the key study for this endpoint. Most up to date source at the time.

Endpoint:
density, other
Remarks:
density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Up to 2008
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: Non-GLP, non-guideline, Information from published handbook, acceptable with restrictions.
Principles of method if other than guideline:
The use of secondary sources of data is acceptable when they are based on a critical evaluation of peer-reviewed data and a consequent selection of a reliable and representative value for the property under investigation. The introduction to the CRC Handbook of Chemistry and Physics states that data for physical constants have been taken from many sources, including both compilations and the primary literature. Where conflicts were found, the value deemed most reliable was chosen. Therefore, although the method used is not known, the values presented here are acceptable as they are from a reliable secondary source of phys chem. data.
GLP compliance:
not specified
Remarks:
No data reported
Type of method:
other: No data reported
Specific details on test material used for the study:
N/A
Dynamic viscosity of test material:
N/A
Key result
Type:
density
Density:
0.589 g/cm³
Temp.:
25 °C
Remarks on result:
other: Pressure >1 atm

N/A

Conclusions:
The density of isobutane is 0.589 g/cm^3 at 25°C.
Executive summary:

The density of isobutane is 0.589g/cm3 at 25˚C. This information is taken from a reliable peer reviewed handbook and so can be considered reliable and suitable for use as the key study for this endpoint.

Endpoint:
density, other
Remarks:
density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Up to 2008
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: Non-GLP, non-guideline, Information from published handbook, acceptable with restrictions.
Principles of method if other than guideline:
The use of secondary sources of data is acceptable when they are based on a critical evaluation of peer-reviewed data and a consequent selection of a reliable and representative value for the property under investigation. The introduction to the CRC Handbook of Chemistry and Physics states that data for physical constants have been taken from many sources, including both compilations and the primary literature. Where conflicts were found, the value deemed most reliable was chosen. Therefore, although the method used is not known, the values presented here are acceptable as they are from a reliable secondary source of phys chem. data.
GLP compliance:
not specified
Remarks:
No data reported
Type of method:
other: No data reported
Specific details on test material used for the study:
N/A
Dynamic viscosity of test material:
N/A
Key result
Type:
density
Density:
0.423 g/cm³
Temp.:
-162 °C

N/A

Conclusions:
The density of methane is 0.423 g/cm^3 at -162°C.
Executive summary:

The density of methane is 0.423g/cm3 at -162°C. This information is taken from a reliable peer reviewed handbook and so can be considered reliable and suitable for use as the key study for this endpoint.

Endpoint:
density, other
Remarks:
density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Up to 2008
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: Non-GLP, non-guideline, Information from published handbook, acceptable with restrictions.
Principles of method if other than guideline:
The use of secondary sources of data is acceptable when they are based on a critical evaluation of peer-reviewed data and a consequent selection of a reliable and representative value for the property under investigation. The introduction to the CRC Handbook of Chemistry and Physics states that data for physical constants have been taken from many sources, including both compilations and the primary literature. Where conflicts were found, the value deemed most reliable was chosen. Therefore, although the method used is not known, the values presented here are acceptable as they are from a reliable secondary source of phys chem. data.
GLP compliance:
not specified
Remarks:
No data reported
Type of method:
other: No data reported
Specific details on test material used for the study:
N/A
Dynamic viscosity of test material:
N/A
Key result
Type:
density
Density:
0.493 g/cm³
Temp.:
25 °C
Remarks on result:
other: Pressure >1 atm

N/A

Conclusions:
The density of propane is 0.493 g/cm^3 at 25°C.
Executive summary:

The density of propane is 0.493 g/cm3 at 25˚C. This information is taken from a reliable peer reviewed handbook and so can be considered reliable and suitable for use as the key study for this endpoint.

Description of key information

The density of the substances in the category ranges from 0.423 to 0.589 g/cm3.

Key value for chemical safety assessment

Relative density at 20C:
0.525

Additional information

Data from the CRC handbook (Lide 2008) were available for the substances methane, ethane, propane, butane and isobutane. Data are also available from the Merck handbook (O’Neill 2006) for methane, ethane, propane and butane. The information is taken from reliable peer reviewed handbooks and so can be considered reliable and suitable for use for this endpoint.

The density of methane is 0.423 g/cm3 at -162°C, ethane is 0.545 g/cm3 at -89˚C, propane is 0.493 g/cm3 at 25°C, butane is 0.573g/cm3 at 25°C and isobutane is 0.589 g/cm3 at 25°C. The mean of the density values for the category is 0.525 at 25°C and this has been used to complete the 'key value for chemical safety assessment'.