Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

1. Description of first aid measuresAfter inhalation:Supply fresh air; consult doctor in case of complaints.After skin contact:Immediately wash with water and soap and rinse thoroughly. If symptoms persist, consult a doctor.After eye contact:Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.After swallowing:Rinse out mouth and then drink plenty of water.If symptoms persist consult doctor.2. Most important symptoms and effects, both acute and delayedNo further relevant information available.3. Indication of any immediate medical attention and special treatment neededSymptomatic treatment

Fire-fighting measures

1. Extinguishing mediaSuitable extinguishing agents:Use fire extinguishing methods suitable to surrounding conditions.For safety reasons unsuitable extinguishing agents:Water with full jet.2. Special hazards arising from the substance or mixtureNone known.3. Advice for firefightersProtective equipment:Wear self-contained respiratory protective device.Additional information:Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

1. Personal precautions, protective equipment and emergency proceduresParticular danger of slipping on leaked/spilled product.2. Environmental precautionsDo not allow to enter sewers/ surface or ground water.Do not allow to penetrate the ground/soil.3. Methods and material for containment and cleaning upAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Handling and storage

1. Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.Information about fire - and explosion protection:Protect from heat.2. Conditions for safe storage, including any incompatibilitiesStorage:Requirements to be met by storerooms and receptacles:Provide floor trough without outlet.Information about storage in one common storage facility:Store away from oxidising agents.Further information about storage conditions:Store in cool, dry conditions in well sealed receptacles.Protect from exposure to the light.Storage class:10 - Combustible Liquid (Flash point >55 °C).

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
3082
Shipping information
Proper shipping name and description:
UMWELTGEFÄHRDENDER STOFF, FLÜSSIG, N.A.G
Chemical name:
2-[2-(4-benzoylphenoxy)ethoxy]ethyl methacrylat
Language:
German
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
3082
Shipping information
Proper shipping name and description:
UMWELTGEFÄHRDENDER STOFF, FLÜSSIG, N.A.G
Chemical name:
2-[2-(4-benzoylphenoxy)ethoxy]ethyl methacrylat
Language:
German
Labels:
9
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 3082
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Chemical name:
2-[2-(4-benzoylphenoxy)ethoxy]ethyl methacrylate
Labels:
9
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
3082
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Chemical name:
2-[2-(4-benzoylphenoxy)ethoxy]ethyl methacrylate
Labels:
9
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Control parametersIngredients with limit values that require monitoring at the workplace: Not required.Additional information: The lists valid during the making were used as basis.Engineering measures:Technical measures and appropriate working operations should be given priority over the use of personal protectiveequipment.Personal protective equipment:General protective and hygienic measures:Immediately remove all soiled and contaminated clothing.Wash hands before breaks and at the end of work.Respiratory protection:Not required.Protection of hands:Protective gloves (EN374)Recommendation:Material of gloves:Nitrile rubber, NBRThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer.Recommended thickness of the material: >= 0,35 mmPenetration time of glove material:Break through time > 8 hEye protection:Tightly sealed goggles (EN 166).Body protection:Protective work clothingLimitation and supervision of exposure into the environment:No further relevant information available.Risk management measures:A Chemical Safety Assessment is not required.

Stability and reactivity

1. ReactivityNo further relevant information available.2. Chemical stabilityStable under recommended storage conditions.Thermal decomposition / conditions to be avoided:No decomposition if used and stored according to specifications.3. Possibility of hazardous reactionsNo further relevant information available.4. Conditions to avoidLight, UV-radiation5. Incompatible materialsNo further relevant information available.6. Hazardous decomposition productsNo further relevant information available.

Disposal considerations

1. Waste treatment methodsRecommendationMust not be disposed together with household garbage. Do not allow product to reach sewage system.Disposal must be made according to official regulations.2. Uncleaned packaging:Recommendation: Packagings that may not be cleansed are to be disposed of in the same manner as the product.