Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General information

Remove soiled or soaked clothing immediately

In any case show the physician the Safety Data Sheet

After inhalation

Remove the casualty into fresh air and keep him calm.

After contact with skin

In case of contact with skin treat with dilute soda solution and wash off immediately with soap and water

After contact with eyes

In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion

Summon a doctor immediately.

Indication of any immediate medical attention and special treatment needed

Treatment

Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media

water spray jet

foam

carbon dioxide

dry powder

Special hazards arising from the substance or mixture

In the event of fire the following can be released:

Carbon monoxide (CO)

Carbon dioxide (CO2)

Combustion gases of organic materials must in principle be graded as inhalation poisons.

Advice for firefighters

Special protective equipment for firefighting

Use self-contained breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Ensure adequate ventilation.

Use personal protective clothing.

Environmental precautions

Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up

Pick up with absorbent material (eg sand or sawdust). Rinse away the rest with a weakly alkaline aqueous solution.

Dispose of as prescribed

Handling and storage

Precautions for safe handling

Advice on safe handling

Ensure adequate ventilation.

Advice on protection against fire and explosion

Observe the general rules of industrial fire protection

Conditions for safe storage, including any incompatibilities

Further information on storage conditions

- sensitive to frost - If the product becomes opaque, thick or frozen owing to low temperatures, allow to thaw at 30 - 40 °C and homogenize it.The product will then be suitable for use.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures

Avoid contact with eyes and skin

Hygiene measures

Observe the usual precautions when handling chemicals.

Do not eat or drink during work time.

Keep away from foodstuffs and beverages.

Wash hands before breaks and after work.

Remove soiled or soaked clothing immediately.

Hand protection : For long-term exposure:

Butyl rubber gloves.

Minimum breakthrough time / gloves : 480 min

Minimum thickness / gloves 0,7 mm

For short-term exposure (splash protection):

Nitrile rubber gloves.

Minimum breakthrough time / gloves : 30 min

Minimum thickness / gloves 0,4 mm

These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.+

Eye protection : safety glasses

Body protection : protective clothing

Stability and reactivity

Possibility of hazardous reactions

Reactions with strong alkalies.

Incompatible materials

not known

Hazardous decomposition products

When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods

Product

In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging

Regulations concerning reuse or disposal of used packaging materials must be observed.