Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 449-400-0 | CAS number: 25822-43-9
Guidance on Safe Use
Administrative data
First-aid measures
General advice:
Take off all contaminated clothing immediately. Never give anything by mouth to an unconscious person. Remove from exposure, lie down.
If you feel unwell, seek medical advice (show the label where possible).
If inhaled:
Remove to fresh air. Call a physician immediately.
In case of skin contact:
Wash off immediately with soap and plenty of water.
In case of eye contact:
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed:
Clean mouth with water and drink afterwards plenty of water. If a person vomits when lying on his back, place him in the recovery position.
Do NOT induce vomiting. If swallowed, seek medical advice immediately and show this container or label.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Unsuitable extinguishing media: High volume water jet
Specific hazards during firefighting:
Cool closed containers exposed to fire with water spray. Do not allow run-off from fire fighting to enter drains or water courses.
Special advice for firefighters:
Use personal protective equipment.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Wear respiratory protection. Wear personal protective equipment.
Environmental precautions:
Avoid subsoil penetration. Do not allow material to contaminate ground water system. Do not contaminate water.
If the product contaminates rivers and lakes or drains inform respective authorities. Do not let product enter drains.
Methods and materials for containment and cleaning up:
Remove mechanically and with care (e.g. with clean polyethylene plastic shovel).
Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and
place in container for disposal according to local/national regulations.
Other information:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Handling and storage
Advice on safe handling: See personal protection equipment.
Requirements for storage areas and containers:
Electrical installations / working materials must comply with the technological safety standards.
Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep container tightly closed. No smoking.
Further information on storage conditions:
Avoid impurities (e.g. rust, dust, ash), risk of decomposition.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a hazardous good according to the meaning of the transport regulations.
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a hazardous good according to the meaning of the transport regulations.
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a hazardous good according to the meaning of the transport regulations.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures:
Provide adequate ventilation.
Personal protective equipment:
Respiratory protection:
Respirator with filter type ABEK
Hand protection:
Material: butyl-rubber; Glove thickness: 0.5 mm; Breakthrough time: >= 8 h
Remarks: Skin should be washed after contact.
Eye protection:
Tightly fitting safety goggles; Wear face protection.
Skin and body protection:
Protective suit; Remove and wash contaminated clothing before re-use.
Hygiene measures:
Wash hands before breaks and immediately after handling the product. Keep away from food, drink and animal feedingstuffs.
Environmental exposure controls:
Avoid subsoil penetration.
Do not allow material to contaminate ground water system.
Do not contaminate water.
If the product contaminates rivers and lakes or drains inform respective authorities.
Do not let product enter drains.
Stability and reactivity
Chemical stability:
The product is chemically stable.
Possibility of hazardous reactions:
Vapours may form explosive mixture with air.
Stability:
Stable under recommended storage conditions.
Conditions to avoid:
Keep away from heat and sources of ignition.
Incompatible materials:
Materials to avoid: Accelerators, strong acids and bases, heavy metals and heavy metal salts, reducing agents.
Avoid impurities (e.g. rust, dust, ash), risk of decomposition.
Hazardous decomposition products:
Irritant, caustic, flammable, noxious/toxic gases and vapours can develop in the case of fire and decomposition.
Disposal considerations
Waste treatment methods
Advice on disposal and packaging:
Dispose of in conjunction with appropriate waste disposal authorities and in accordance with disposal regulations.
Waste codes should be assigned by the user based on the application for which the product was used.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
