Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2006-05-04 to 2006-07-17
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.4 (Vapour Pressure)
Version / remarks:
1992
Deviations:
no
Qualifier:
according to guideline
Guideline:
OECD Guideline 104 (Vapour Pressure Curve)
Version / remarks:
1995
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Type of method:
dynamic method
Key result
Temp.:
25 °C
Vapour pressure:
3.3 Pa
Remarks on result:
other: calculated value

The vapour pressure was measured with the dynamic method in the temperature range of 82 °C to 198 °C. The values for 20, 25 and 50 °C are calculated, using the Antoine constants A, B and C as shown.


 


Validity criteria for the measurement of the vapour pressure:

























Target condition according to
guideline:
Actual condition according to
the study:
Validity criteria met:
At least two vapour pressure and temperature values - and preferably three or more – are required in the range 0 to 50 °C (or 120 to 150 °C).

Temperatures tested ranged between 82 - 198 °C.


The mean of two measurements is stated.


Yes
A log p versus 1 /T curve should be stated.A log p versus 1/T curve is given in the raw data.Yes
An estimate of the vapour pressure at 20 or 25 °C should be stated.Values for 20 and 25 °C are given.Yes

 

Conclusions:
The Antoine constants from the regression of the data from the dynamic method were used to calculate the vapour pressure for the test item at 25 °C, which was found to be 3.3 Pa.
Executive summary:

The Antoine constants from the regression of the data from the dynamic method were used to calculate the vapour pressure for the test item at 25 °C, which was found to be 3.3 Pa.


























T/°C



p/hPa



p/Pa



20



1.4 x 10-2



1.4



25



3.3 x 10-2



3.3



50



7.8 x 10-2



78


Description of key information

The Antoine constants from the regression of the data from the dynamic method were used to calculate the vapour pressure for the test item at 25 °C, which was found to be 3.3 Pa.

Key value for chemical safety assessment

Vapour pressure:
3.3 Pa
at the temperature of:
25 °C

Additional information