Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
- General information:
Remove soiled or soaked clothing immediately.

- After inhalation:
When inhaled remove to fresh air and seek medical aid.

- After contact with skin:
In case of contact with skin wash off immediately with soap and water.

- After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.

- After ingestion:
Summon a doctor immediately.

Most important symptoms and effects, both acute and delayed
- Symptoms:
No symptoms known currently.

- Hazards:
No hazards known at this time.

Indication of any immediate medical attention and special treatment needed
- Treatment:
Treat symptomatically.

Fire-fighting measures

Extinguishing media
- Suitable extinguishing media:
water spray jet
foam

- Extinguishing media that must not be used for safety reasons:
dry powder
carbon dioxide
strong water jet

Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Nitrous gases (NOx)
Sulphur dioxide (SO2)

Advice for firefighters
- Special protective equipment for firefighting:
Use self-contained breathing apparatus.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear suitable personal protective equipment.
Ensure adequate ventilation.
Avoid dust formation.

Environmental precautions:
Do not allow to enter drains or waterways.

Methods and material for containment and cleaning up:
Pick up mechanically. Rinse away rest with warm water.

Handling and storage

Precautions for safe handling
- Advice on safe handling:
Avoid the formation and deposition of dust.
Open and handle container with care.

- Hygiene measures:
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

- Advice on protection against fire and explosion:
The product is capable of a dust explosion.
Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations.
Keep away from sources of ignition - refrain from smoking.

Conditions for safe storage, including any incompatibilities
- Further information on storage conditions:
Keep only in the original container in a cool, well ventilated place.

Specific end use(s):
No further recommendations.

Transport information

Land transport (ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not restricted
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:
Avoid contact with eyes and skin.
Do not inhale dust.

Respiratory protection :
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure.
Full mask to standard DIN EN 136
Particle filter P, to standard DIN EN 143
The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national
regulations.

Hand protection :
- For long-term exposure:
Butyl rubber gloves.
Minimum thickness (glove): not determined
With solid dry substances permeation is not to be expected, therefore the breakthrough-time for this protective glove has not been measured.
- For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum thickness (glove): not determined.
With solid dry substances permeation is not to be expected, therefore the breakthrough-time for this protective glove has not been measured.
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection :
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

Stability and reactivity

Reactivity:
See section "Possibility of hazardous reactions"

Chemical stability:
Stable.

Possibility of hazardous reactions:
When handled and stored appropriately no dangerous reactions are known.

Conditions to avoid:
None known.

Incompatible materials:
not known.

Hazardous decomposition products:
No hazardous decomposition products known.

Disposal considerations

Waste treatment methods
- Product:
In accordance with local authority regulations, take to special waste incineration plant.
- Uncleaned packaging:
Packaging that cannot be cleaned should be disposed of as product waste.