Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 401-280-0 | CAS number: 91273-04-0 CM 23-376; REOMET 30
Guidance on Safe Use
Administrative data
First-aid measures
Immediately remove contaminated clothing. If the patient is likely to become unconscious, place and transport in stable sideways position (recovery position). First aid personnel should pay attention to their own safety.
If inhaled:
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.
On skin contact:
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion:
Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11 of the safety data sheet.
Further important symptoms and effects are so far not known.
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Fire-fighting measures
Suitable extinguishing media: water spray, foam, carbon dioxide, dry powder
Unsuitable extinguishing media for safety reasons: water jet
Special hazards arising from the substance or mixture
carbon oxides, nitrogen oxides, irritant gases/vapours, toxic gases/vapours
Do not release chemically contaminated water into drains, soil or surface water. Sufficient measures must be taken to retain the water used for extinguishing. Dispose of contaminated water and soil according to local regulations.
Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental release measures
Sources of ignition should be kept well clear. Avoid contact with the skin, eyes and clothing. Do not breathe vapour/spray.
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up
Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
Collect waste in suitable containers, which can be labeled and sealed.
Handling and storage
Precautions for safe handling
Handle and open container with care. Avoid vapor formation. When using do not eat, drink or smoke.
Provide good ventilation of working area (local exhaust ventilation if necessary).
Protection against fire and explosion:
Vapours may form ignitable mixture with air. Take precautionary measures against static discharges.
Conditions for safe storage, including any incompatibilities
Further information on storage conditions: Segregate from foodstuffs. Keep only in the original container. Take precautionary measures against static discharges. Keep container tightly closed.
Avoid all sources of ignition: heat, sparks, open flame.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN3267
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN3267
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN3267
Shipping information
- Proper shipping name and description:
- CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (contains 1-[N,N-BIS{2-ETHYLHEXYL}AMINOMETHYL]-1,2,4-TRIAZOLE)
- Chemical name:
- 1-(N,N-BIS[2-ETHYLHEXYL]AMINOMETHYL)-1,2,4-TRIAZOLE
- Labels:
- 8
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN3267
Shipping information
- Proper shipping name and description:
- CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (contains 1-[N,N-BIS{2-ETHYLHEXYL}AMINOMETHYL]-1,2,4-TRIAZOLE)
- Chemical name:
- 1-(N,N-BIS[2-ETHYLHEXYL]AMINOMETHYL)-1,2,4-TRIAZOLE
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
No occupational exposure limits.
Respiratory protection:
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Hand protection:
Chemical resistant protective gloves (EN 374) Suitable materials for short-term contact (recommended: At least protective index 2, corresponding >30 minutes of permeation time according to EN 374) butyl rubber (butyl) - 0.7 mm coating thickness nitrile rubber (NBR) - 0.4 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
Body protection:
Body protection must be chosen based on level of activity and exposure., acid- resp. lye-proof apron, e.g. of rubber (f.e. according to EN 14605), protection boots, f.e. of rubber (e.g. according to EN 20346), acid-proof chemical protection suit (f.e. according to EN 14605).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work.
Stability and reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions known.
Stable under normal conditions.
Conditions to avoid
Avoid electro-static discharge.
Incompatible materials
Substances to avoid: strong acids, strong bases, strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products: carbon oxides, nitrogen oxides, toxic gases/vapours
Disposal considerations
Waste treatment methods
Must be sent to a suitable incineration plant, observing local regulations.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible and disposed of in the same manner as the substance/product.
Clean packaging material should be subjected to waste management schemes (recovery recycling, reuse) according to local legislation.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
