Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-202-3 | CAS number: 79-39-0
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
General:
First aider needs to protect himself. Medical treatment is necessary if symptoms are evidently caused by the effects on the skin, or the eyes, or by inhalation of its dust.Immediately remove contaminated clothing.
4.1 Description of first aid measures
Inhalation:
Move subject to fresh air and keep him calm. In case of discomfort: Supply with medical care.
Skin Contact:
Wash off immediately with soap and water. If skin irritation occurs consult a physician.
Eye contact:
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. See a physician.
Ingestion:
Call a physician immediately.
4.2 Most important symptoms and effects, both acute and delayed:
Acute dermal irritation/corrosion Acute eye irritation/corrosion Risk of serious damage to eyes. gastrointestinal irritation with nausea, vomiting and diarrhea
4.3 Indication of any immediate medical attention and special treatment needed
Hazards:
Serious Eye Damage/Eye Irritation
Treatment:
Treat symptomatically.
First aider needs to protect himself. Medical treatment is necessary if symptoms are evidently caused by the effects on the skin, or the eyes, or by inhalation of its dust.Immediately remove contaminated clothing.
4.1 Description of first aid measures
Inhalation:
Move subject to fresh air and keep him calm. In case of discomfort: Supply with medical care.
Skin Contact:
Wash off immediately with soap and water. If skin irritation occurs consult a physician.
Eye contact:
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. See a physician.
Ingestion:
Call a physician immediately.
4.2 Most important symptoms and effects, both acute and delayed:
Acute dermal irritation/corrosion Acute eye irritation/corrosion Risk of serious damage to eyes. gastrointestinal irritation with nausea, vomiting and diarrhea
4.3 Indication of any immediate medical attention and special treatment needed
Hazards:
Serious Eye Damage/Eye Irritation
Treatment:
Treat symptomatically.
Fire-fighting measures
General Fire Hazards:
Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Dust can form an explosive mixture with air. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
5.1 Extinguishing media
Suitable extinguishing media:
Water spray. foam Dry chemical. Carbon dioxide
Unsuitable extinguishing media:
High volume water jet
5.2 Special hazards arising from the substance or mixture:
May be released in case of fire: carbon monoxide, carbon dioxide, organic products of decomposition.
5.3 Advice for firefighters
Special fire fighting procedures:
Avoid dust formation. In the event of fire, cool the endangered containers with water. Take precautionary measures against static discharges.
Special protective equipment for fire-fighters:
Wear self-contained breathing apparatus.
Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Dust can form an explosive mixture with air. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
5.1 Extinguishing media
Suitable extinguishing media:
Water spray. foam Dry chemical. Carbon dioxide
Unsuitable extinguishing media:
High volume water jet
5.2 Special hazards arising from the substance or mixture:
May be released in case of fire: carbon monoxide, carbon dioxide, organic products of decomposition.
5.3 Advice for firefighters
Special fire fighting procedures:
Avoid dust formation. In the event of fire, cool the endangered containers with water. Take precautionary measures against static discharges.
Special protective equipment for fire-fighters:
Wear self-contained breathing apparatus.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures:
Assure sufficient ventilation. Wear protective gloves/protective clothing/eye protection/face protection. Keep away sources of ignition. Use breathing apparatus if exposed to vapours/dust/mist/aerosol. Avoid breathing dust. Do not eat, drink or smoke when using this product. Wash hands thoroughly with soap and water after handling.
6.1.1 For non-emergency personnel:
Evacuate area and do not approach spilled product. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). For personal protection see section 8.
6.1.2 For emergency responders:
No data available.
6.2 Environmental Precautions:
Prevent product from getting into drains/surface water/groundwater.
6.3 Methods and material for containment and cleaning up:
Take up mechanically. Dispose of in accordance with regulations.
6.4 Reference to other sections:
For personal protection see section 8. For disposal considerations see section 13.
Assure sufficient ventilation. Wear protective gloves/protective clothing/eye protection/face protection. Keep away sources of ignition. Use breathing apparatus if exposed to vapours/dust/mist/aerosol. Avoid breathing dust. Do not eat, drink or smoke when using this product. Wash hands thoroughly with soap and water after handling.
6.1.1 For non-emergency personnel:
Evacuate area and do not approach spilled product. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). For personal protection see section 8.
6.1.2 For emergency responders:
No data available.
6.2 Environmental Precautions:
Prevent product from getting into drains/surface water/groundwater.
6.3 Methods and material for containment and cleaning up:
Take up mechanically. Dispose of in accordance with regulations.
6.4 Reference to other sections:
For personal protection see section 8. For disposal considerations see section 13.
Handling and storage
7.1 Precautions for safe handling:
Avoid the formation and deposition of dust. Provide extraction if dust raised. Keep container tightly closed. Do not inhale dust. Avoid contact with skin and eyes. Do not eat, drink or smoke during use. In the event of fire, cool the endangered containers with water. Take precautionary measures against static discharges.
7.2 Conditions for safe storage, including any incompatibilities:
Store in a well-ventilated place. Keep container tightly closed. Keep only in the original container at a temperature not exceeding 30 °C. Protect from the action of light. Do not store together with acids or alkalis. Do not store together with strong oxidizing agents. See section 10: Materials to avoid Observe prohibition against storing together!
7.3 Specific end use(s):
We are unaware of any specific end uses which go beyond the data reported in Section 1.
Avoid the formation and deposition of dust. Provide extraction if dust raised. Keep container tightly closed. Do not inhale dust. Avoid contact with skin and eyes. Do not eat, drink or smoke during use. In the event of fire, cool the endangered containers with water. Take precautionary measures against static discharges.
7.2 Conditions for safe storage, including any incompatibilities:
Store in a well-ventilated place. Keep container tightly closed. Keep only in the original container at a temperature not exceeding 30 °C. Protect from the action of light. Do not store together with acids or alkalis. Do not store together with strong oxidizing agents. See section 10: Materials to avoid Observe prohibition against storing together!
7.3 Specific end use(s):
We are unaware of any specific end uses which go beyond the data reported in Section 1.
Transport information
Land transport (UN RTDG/ADR/RID)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a dangerous good within the meaning of transportation regulations.
Inland waterway transport (UN RTDG/ADN(R))
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a dangerous good within the meaning of transportation regulations.
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a dangerous good within the meaning of transportation regulations.
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not a dangerous good within the meaning of transportation regulations.
Additional transport information
Additional information
- Special provisions / remarks / other:
- Not a dangerous good within the meaning of transportation regulations.
Exposure controls / personal protection
An occupational Exposure Limit-value is not established (2007).
Occupational exposure controls
For monitoring procedures refer to for instance "Empfohlene Analysenverfahren für Arbeitsplatzmessungen" Schriftenreihe der Bundesanstalt für Arbeitsschutz und "NIOSH Manual of Analytical Methods", National Institute for Occupational Safety and Health
8.1. Control parameters
Occupational Exposure Limits
Chemical name Type Exposure Limit Values Source
DNEL-Values
Critical component Type Route of Exposure Health Warnings Remarks
methacrylamide Workers Oral 0.73 mg/kg/d
Workers Dermal 0.73 mg/kg/d
Workers Inhalation 2.5 mg/m3
PNEC-Values
Critical component Environmental compartment PNEC-Values Remarks
methacrylamide Water. 2 mg/l
soil 0.617 mg/kg
Air
8.2 Exposure controls
Appropriate Engineering Controls:
For monitoring procedures refer for instance to "Empfohlene Analysenverfahren für Arbeitsplatzmessungen", Schriftenreihe der Bundesanstalt für Arbeitsschutz and "NIOSH Manual of Analytical Methods", National Institute for Occupational Safety and Health
Individual protection measures, such as personal protective equipment
Eye/face protection:
tightly fitting goggles Ensure that eyewash stations and safety showers are close to the workstation location.
Hand Protection:
Material: butyl rubber gloves (minimal thickness 0.3 mm)
Break-through time: 480 min
Guideline: EN 374
Additional Information: Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., The above mentioned hand protection is based on special knowledge of the chemical and the intended handling of this product, however, it still may not be suited for all workplaces. A qualified hazard assessment should be made prior to the onset of work in order to determine the suitability of gloves for specific working environments and processes., Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Skin and Body Protection:
On handling of larger quantities: face mask, chemical-resistant boots and apron
Respiratory Protection:
respiratory protection in case of dust formation short term: filter appliance, filter P2 short-term: filter appliance, combination filter ABEK
Hygiene measures:
Store work clothing separately. Take off all contaminated clothing immediately. Follow the usual good standards of occupational hygiene. Clean skin thoroughly after work; apply skin cream.
Environmental Controls:
see section 6.
Occupational exposure controls
For monitoring procedures refer to for instance "Empfohlene Analysenverfahren für Arbeitsplatzmessungen" Schriftenreihe der Bundesanstalt für Arbeitsschutz und "NIOSH Manual of Analytical Methods", National Institute for Occupational Safety and Health
8.1. Control parameters
Occupational Exposure Limits
Chemical name Type Exposure Limit Values Source
DNEL-Values
Critical component Type Route of Exposure Health Warnings Remarks
methacrylamide Workers Oral 0.73 mg/kg/d
Workers Dermal 0.73 mg/kg/d
Workers Inhalation 2.5 mg/m3
PNEC-Values
Critical component Environmental compartment PNEC-Values Remarks
methacrylamide Water. 2 mg/l
soil 0.617 mg/kg
Air
8.2 Exposure controls
Appropriate Engineering Controls:
For monitoring procedures refer for instance to "Empfohlene Analysenverfahren für Arbeitsplatzmessungen", Schriftenreihe der Bundesanstalt für Arbeitsschutz and "NIOSH Manual of Analytical Methods", National Institute for Occupational Safety and Health
Individual protection measures, such as personal protective equipment
Eye/face protection:
tightly fitting goggles Ensure that eyewash stations and safety showers are close to the workstation location.
Hand Protection:
Material: butyl rubber gloves (minimal thickness 0.3 mm)
Break-through time: 480 min
Guideline: EN 374
Additional Information: Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., The above mentioned hand protection is based on special knowledge of the chemical and the intended handling of this product, however, it still may not be suited for all workplaces. A qualified hazard assessment should be made prior to the onset of work in order to determine the suitability of gloves for specific working environments and processes., Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Skin and Body Protection:
On handling of larger quantities: face mask, chemical-resistant boots and apron
Respiratory Protection:
respiratory protection in case of dust formation short term: filter appliance, filter P2 short-term: filter appliance, combination filter ABEK
Hygiene measures:
Store work clothing separately. Take off all contaminated clothing immediately. Follow the usual good standards of occupational hygiene. Clean skin thoroughly after work; apply skin cream.
Environmental Controls:
see section 6.
Stability and reactivity
10.1 Reactivity:
see section "Possibility of hazardous reactions"
10.2 Chemical Stability:
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions:
Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions.persulfate
10.4 Conditions to avoid:
Operations that create dust.
10.5 Incompatible Materials:
Oxidizing agents. Initiators. Persulphate
10.6 Hazardous Decomposition Products:
None when used as directed.
see section "Possibility of hazardous reactions"
10.2 Chemical Stability:
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions:
Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions.persulfate
10.4 Conditions to avoid:
Operations that create dust.
10.5 Incompatible Materials:
Oxidizing agents. Initiators. Persulphate
10.6 Hazardous Decomposition Products:
None when used as directed.
Disposal considerations
13.1 Waste treatment methods
General information:
Dispose of waste and residues in accordance with local authority requirements.
Disposal methods:
Waste is hazardous. It must be disposed of in accordance with the regulations after consultation of the competent local authorities and the disposal company in a suitable and licensed facility. Strictly controlled conditions during disposal or treatment to air, wastewater and waste. Do not add wastewater to a biological wastewater treatment plant Bring wastewater containing AOX for professional disposal. The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.
Contaminated Packaging:
Contaminated packaging should ideally be emptied; it can then be recycled after having been decontaminated. Packaging that cannot be cleaned should be disposed of professionally. Uncontaminated packaging may be taken for recycling.
General information:
Dispose of waste and residues in accordance with local authority requirements.
Disposal methods:
Waste is hazardous. It must be disposed of in accordance with the regulations after consultation of the competent local authorities and the disposal company in a suitable and licensed facility. Strictly controlled conditions during disposal or treatment to air, wastewater and waste. Do not add wastewater to a biological wastewater treatment plant Bring wastewater containing AOX for professional disposal. The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.
Contaminated Packaging:
Contaminated packaging should ideally be emptied; it can then be recycled after having been decontaminated. Packaging that cannot be cleaned should be disposed of professionally. Uncontaminated packaging may be taken for recycling.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
