Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 205-465-5 | CAS number: 141-17-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Manufacture, use & exposure
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Roller application etc. : Polymer preparations
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Filling of equipment from drums or containers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Drilling mud (re-)formulation; Use in contained batch processes
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Drill floor operations
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Operation of solids filtering equipment; Elevated temperature
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Cleaning of solids filtering equipment; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Treatment and disposal of filtered solids; Use in contained systems
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Process sampling
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Pouring from small containers; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- General exposures (open systems)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Equipment cleaning and maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Functional Fluids GEST13_I
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Functional Fluids GEST13_I - Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers GES13_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial end-use of washing and cleaning products
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- GES3: IFRA PG 1 Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containmend conditions
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- GES3: IFRA PG 2 Chemical production in closed continuous process occasional controlles exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- GES3: IFRA PG 3 Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- GES3: IFRA PG 4 Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- GES3: IFRA PG 5 Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- GES3: IFRA PG 11 Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- GES3: IFRA PG 12 Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- GES3: IFRA PG 13 Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- GES3: IFRA PG 14 Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- GES3: IFRA PG 15 Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- GES3: IFRA PG 16 Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- GES3: IFRA PG 17 Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Treatment of articles by dipping and pouring: processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Coating
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Coating - application of permanent coating agents during foaming
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Treatment of articles by dipping and pouring: reactive processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix) - use of processing aids in finishing formulations: roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
18, 14, 20, 12, 17, 21, 1, 8, 2, 11, 13, 16, 3, 6, 4, 15, 9, 22, 7, 10, 5, GRG: General Rubber Goods
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 24: Lubricants, greases, release products
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial uses; Metal surface treatment products
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Transfer and dilution of concentrated product by using dedicated dosing system; medium RMM
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Low energy manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Industrial uses; Treatment of articles by dipping or pouring; medium RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Industrial spraying; Automated task; Open systems; Long term; with LEV
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Industrial spraying; Automated task; Open system; Long term; high RMM
- Process category (PROC):
- PROC 7: Industrial spraying
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial large scale spray application of adhesives in a spray booth - Large-scale use of adhesives
by spray application,
indoor - Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- application of processing aids
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- handling (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use as an intermediate GEST1B_I
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Use as an intermediate GEST1B_I - Use of substance as an intermediate (not related to Strictly Controlled Conditions). Includes recycling/ recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container). GES1B_I
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Lubricants GEST6_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Lubricants GEST6_I
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Lubricants GEST6_I - Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes. GES6_I
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Application of processing aids (Fibre)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of spin finishes by various technologies e.g. dipping or pouring; process temperature low
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Bulk transfers; Closed systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Drum/batch transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Pouring from small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (open systems)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Phase separation
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Ion exchange processes; Closed systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Process sampling
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing operations; Closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Equipment cleaning and maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of functional fluid at industrial site
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Drum/batch transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use of fuels; Closed systems
- Process category (PROC):
- PROC 16: Use of fuels
- Name of activity / technique:
- Equipment cleaning and maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- handling (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids from/to vessels at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use as binders and release agents GEST10_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Use as binders and release agents GEST10_I - Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing), mould forming and casting, and handling of waste. GES10_I
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial application of reactive adhesives
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial application of reactive adhesives - Mixing of 2- or multi component adhesives in mixing equipment in industry
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial application of reactive adhesives - Large-scale use of reactive adhesives
by low energy distribution,
indoor - Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Automated task; Semi-automated task; Dedicated equipment
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Brushing; Automated task
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Equipment maintenance;
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 35: Washing and cleaning products
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use as intermediate registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Intermediate use of the substance
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (open systems)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Process sampling
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Bulk transfers; Closed systems
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Bulk transfers; Open systems
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Equipment cleaning and maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Handling (Leather)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Handling (Leather)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling (Leather)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer of substance or mixture at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 23: Leather treatment products
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- manipulation of substances bound in materials
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- manipulation of substances bound in materials - mechanical processes resulting of release of substances
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Mining chemicals GEST22_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Mining chemicals GEST22_I - Covers the use of the substance in extraction processes at mining operations, including material transfers, winning and separation activities, and substance recovery and disposal. GES22_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of aqueous polymer dispersions and dispersion powders - Processing Aids
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing, blending, completion - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Storage and delivery of finished products - in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - use of (non reactive) finishing products: roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - use of (non reactive) finishing products: dipping and pouring
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (Inclusion in Matrix) - use of non processing/exhausting aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Non-Reactive Processing Aids) - Roller application etc. : processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Handling (Fibre)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Transfer of substance or mixture at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- General industrial use of lubricants and greases in vehicles or machinery
ATIEL-ATC Group B [i] - Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Initial factory fill from header tank; Lubricating Oil
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Initial factory fill by pouring from containers; Lubricating Oil
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Initial factory fill by injection of greases.
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Use as a lubricant/grease in a closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Maintenance activities industrial settings. General exposure during maintenance work including draining, refilling and R&D (e.g. engine testing)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use as a fuel GEST12_I
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use as a fuel GEST12_I - Covers the use as a fuel (or fuel additive) and includes activities associated with its transfer, use, equipment maintenance and handling of waste. GES12_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as a fuel GEST12_I - Covers the use as a fuel (or fuel additive) and includes activities associated with its transfer, use, equipment maintenance and handling of waste. GES12_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as a fuel GEST12_I - Covers the use as a fuel (or fuel additive) and includes activities associated with its transfer, use, equipment maintenance and handling of waste. GES12_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as a fuel GEST12_I - Covers the use as a fuel (or fuel additive) and includes activities associated with its transfer, use, equipment maintenance and handling of waste. GES12_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use as a fuel GEST12_I - Covers the use as a fuel (or fuel additive) and includes activities associated with its transfer, use, equipment maintenance and handling of waste. GES12_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as a fuel GEST12_I - Covers the use as a fuel (or fuel additive) and includes activities associated with its transfer, use, equipment maintenance and handling of waste. GES12_I
- Process category (PROC):
- PROC 16: Use of fuels
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- application of non processing aids
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- use of processing aids in finishing formulations: roller application or brushing on crust
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- use of (non reactive) finishing products: roller application or brushing on crust
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 23: Leather treatment products
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing, blending, completion - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Storage and delivery of finished products - in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Stripping - closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Stripping, Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Handling (Textile)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Handling (Textile)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling (Textile)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer of substance or mixture at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (Reactive)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (Reactive) - use of reactive processing aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (No Inclusion in Matrix)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (No Inclusion in Matrix) - use of processing aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I - Oil field well drilling and production operations (including drilling muds and well cleaning) including material transfers, on-site formulation, well head operations, shaker room activities and related maintenance. GES5_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I - Oil field well drilling and production operations (including drilling muds and well cleaning) including material transfers, on-site formulation, well head operations, shaker room activities and related maintenance. GES5_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I - Oil field well drilling and production operations (including drilling muds and well cleaning) including material transfers, on-site formulation, well head operations, shaker room activities and related maintenance. GES5_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I - Oil field well drilling and production operations (including drilling muds and well cleaning) including material transfers, on-site formulation, well head operations, shaker room activities and related maintenance. GES5_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I - Oil field well drilling and production operations (including drilling muds and well cleaning) including material transfers, on-site formulation, well head operations, shaker room activities and related maintenance. GES5_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use in Oil and Gas field drilling and production operations GEST5_I - Oil field well drilling and production operations (including drilling muds and well cleaning) including material transfers, on-site formulation, well head operations, shaker room activities and related maintenance. GES5_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Spraying (Reactive)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Bulk transfers; Closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Bulk transfers; Closed systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Bulk weighing; Closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Bulk weighing; Closed systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Small scale weighing
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering (including Banburys); Elevated temperature
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Production of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Masterbatches
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Injection moulding of articles
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Equipment maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- extrusion (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- extrusion (Inclusion in Matrix) - Production of preparations/articles by extrusion etc. : non processing non reactive agents
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use as Intermediate
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use as Intermediate - - General process exposures (no sampling) - continuous (closed system)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as Intermediate - - General process exposures and sample collection - continuous (closed system with occasional controlled exposure)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as Intermediate - - General process exposures - batch (closed system)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as Intermediate - - General exposures open batch process
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use as Intermediate - - Sample collection
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as Intermediate - - Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Use as Intermediate - - Bulk transfers including loading/unloading of road cars etc
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as Intermediate - - Clean down and Maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use as Intermediate - - Material storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Roller application etc. : reactive processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of aqueous polymer dispersions and dispersion powders - Intermediate use
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing, blending, completion - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Storage and delivery of finished products - in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Stripping - closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Stripping, Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Roller application etc. : processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Mixing
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Mixing - formulation of recipe: foam
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Non-Reactive Processing Aids) - Treatment of articles by dipping and pouring: processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial end-use of washing and cleaning products
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of laundry detergents and conditioners (softener/starch); automatic process (AISE-P101, AISE-P104) - use phase
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of laundry aid (gasing and non-gasing); automatic process (AISE-P107, AISE-P110) - use phase
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of metal cleaner (degreaser, descaler, etch) automatic process (AISE P1006)- use phase
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of train and aeroplane cleaners, car wash products and dewaxing products; semi-automatic process (AISE-P707, AISE-P708, AISE-P709, AISE-P712)- use phase
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of food process cleaner; semi closed cleaning process (AISE-P802)- use phase
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of metal cleaner (degreaser, descaler, etch) semi-automatic process (AISE P1005)- use phase
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of train and aeroplane cleaners, car wash products and dewaxing products; semi-automatic process (AISE-P707, AISE-P708, AISE-P709, AISE-P712)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of car wash products and boat cleaners in spray and rinse processes and spray and wipe manual processes (AISE-P710, AISE-P711, AISE P714)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of boat cleaners; manual process (AISE-P713)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of chain maintenance product; automatic spray process (AISE-P803)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of chain maintenance product; automatic drip and brush process (AISE-P804)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of a foam cleaner; semi-automatic with and without venting process (AISE-P806, AISE-P807)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use in animal housing care and disinfection products; semi-automatic processes (AISE P809, AISE P810)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use in disinfection products; fogging and gassing semi-automatic processes (AISE P811)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of façade/surface cleaning products (AISE P906, AISE P907)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of metal cleaner (degreaser, descaler, etch) manual process (AISE P1004)- preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of laundry detergents and conditioners (softener/starch); automatic process (AISE-P101, AISE-P104) - preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of laundry aid (gasing and non-gasing); automatic process (AISE-P107, AISE-P110) - preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of food process cleaner; cleaning in place (CIP) process (AISE-P801); preparatory phase only
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of food process cleaner; semi closed cleaning process (AISE-P802)- preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of defoaming product; automatic process (AISE-P805); preparatory phase only
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of metal cleaner (degreaser, descaler, etch) semi-automatic process (AISE P1005)- preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of metal cleaner (degreaser, descaler, etch) automatic process (AISE P1006)- preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of boat cleaners; manual process (AISE-P713)- use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use in animal housing care and disinfection products; semi-automatic processes (AISE P809, AISE P810)- use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of metal cleaner (degreaser, descaler, etch) manual process (AISE P1004)- use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial end-use of washing and cleaning products - Use of chain maintenance product; automatic drip and brush process (AISE-P804)- use phase
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial use of non-volatile substances in solvent-borne and solvent-less adhesives / sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Industrial use of non-volatile substances in water borne adhesives / sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use of adhesives, sealants and primers, manual application with LEV
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use of adhesives, sealants and primers, manual application without LEV
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 1: Adhesives, sealants
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated industrial application of adhesives by roller or brushing application, indoor - Use of adhesives
by roller and brushing application with machine equipment
indoor, - Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Monomers - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Blowing agents GEST9_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Blowing agents GEST9_I - Use as a blowing agent for rigid and flexible foams, including material transfers, mixing and injection, curing, cutting, storage and packing GES9_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blowing agents GEST9_I - Use as a blowing agent for rigid and flexible foams, including material transfers, mixing and injection, curing, cutting, storage and packing GES9_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blowing agents GEST9_I - Use as a blowing agent for rigid and flexible foams, including material transfers, mixing and injection, curing, cutting, storage and packing GES9_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blowing agents GEST9_I - Use as a blowing agent for rigid and flexible foams, including material transfers, mixing and injection, curing, cutting, storage and packing GES9_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Blowing agents GEST9_I - Use as a blowing agent for rigid and flexible foams, including material transfers, mixing and injection, curing, cutting, storage and packing GES9_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Blowing agents GEST9_I - Use as a blowing agent for rigid and flexible foams, including material transfers, mixing and injection, curing, cutting, storage and packing GES9_I
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of aqueous polymer dispersions and dispersion powders
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Blending/emulsifying
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing, blending, completion - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing, blending, completion - batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Waste management
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Storage and delivery of finished products - in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Stripping - closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Stripping, Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- extrusion (Reactive)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- extrusion (Reactive) - Production of preparations/articles by extrusion etc. : cross linkers and curing agents
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Reactive Processing Aids) - Treatment of articles by dipping and pouring: reactive processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- textile application: calendering
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- textile application: calendering - Calendering operations: non processing agents
- Process category (PROC):
- PROC 6: Calendering operations
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Reactive Processing Aids) - Roller application etc. : reactive processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Metal working fluids / rolling oils GEST7_I - Covers the use in formulated MWFs/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils. GES7_I
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C - Large scale use of warm applied adhesives by low energy distribution indoor
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial application of reactive adhesives processed above 40 °C - Large-scale use of reactive adhesives by low energy distribution and curing at elevated temperatures indoor
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial use of non-volatile substances in solvent-borne and solvent-less adhesives / sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Industrial use of non-volatile substances in water borne adhesives / sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Industrial small scale use of adhesives, sealants and primers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 1: Adhesives, sealants
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (closed systems)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- General exposures (open systems)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Filling of equipment from drums or containers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Filling of equipment from drums or containers; Dedicated facility
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Filling of equipment from drums or containers; Dedicated facility
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Process sampling
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Metal machining operations
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Manual; Rolling, Brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Automated metal rolling/forming; Elevated temperature; Use in contained systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Semi-automated metal rolling/forming; Elevated temperature
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Semi-automated metal rolling/forming; Elevated temperature
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Equipment cleaning and maintenance; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Equipment cleaning and maintenance; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial use of non-volatile substances in solvent-borne and solvent-less adhesives / sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Industrial use of non-volatile substances in water borne adhesives / sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial automatic mixing of 2- or multi-component adhesives
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial use of reactive adhesives by low energy distribution
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 1: Adhesives, sealants
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Treatment of articles by dipping and pouring: non-processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- use of processing aids in wet end: bring them into contact with hides
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- use of non processing/exhausting aids in wet end: bring them into contact with hides
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- use of reactive processing aids in wet end: bring them into contact with hides
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Process in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 23: Leather treatment products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial application of coatings or inks
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Industrial application of coatings or inks
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- product delivery/storage
- bulk
- outdoor - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- product delivery/storage
- product delivery
- packaged
- outdoor - Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- product delivery/storage
- packaged
- indoor - Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- product delivery/storage
- product storage
- outdoor - Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- preparation of material for application
- enclosed
- liquid products - Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- preparation of material for application
- enclosed
- powder products - Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- preparation of material for application
- continuous
- closed
- liquid products - Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- preparation of material for application
- continuous
- closed
- powder products - Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- preparation of material for application
- batch
- indoor
- liquid products - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- preparation of material for application
- batch
- outdoor
- liquid products
- powder products - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- preparation of material for application
- transfer of material from one container to another
- liquid coatings - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- preparation of material for application
- transfer of material from one container to another
- powder coatings - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- loading of application equipment
- enclosed
- liquid coatings - Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- loading of application equipment
- enclosed
- powder coatings - Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- loading of application equipment
- continuous
- closed
- liquid products - Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- loading of application equipment
- continuous
- closed
- powder products - Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- loading of application equipment
- batch
- indoor
- liquid products - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- loading of application equipment
- batch
- indoor
- powder products - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- loading of application equipment
- batch
- outdoor
- liquid products - Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- loading of application equipment
- transfer of material from one container to another
- liquid products - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- loading of application equipment
- transfer of material from one container to another
- powder products - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- application
- on-line
- roller, spreader, flow coating or printing
- open equipment
- large scale
- liquid coatings
- printing ink
[e.g. metal packaging, coil coating, automotive OEM, flexible packaging, newspapers, wallcoverings] - Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- application
- on-line
- roller, spreader, flow coating or printing
- enclosed equipment
- large scale
- liquid coatings
- printing inks
[e.g. publication gravure] - Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- application
- on-line
- roller, spreader, flow coating or printing
- enclosed equipment
- small scale
- liquid coatings
- printing inks
[e.g. publication gravure] - Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- application
- on-line
- automatic/robotic spray coating or printing
- enclosed equipment
- liquid coatings
- printing inks - Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- application
- on-line
- automatic/robotic spray coating
- enclosed equipment
- powder coatings - Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- application
- on-line
- manual spraying
- open equipment
- liquid coatings - Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- application
- off-line
- manual spraying
- open equipment
- liquid products - Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- - off-line
- manual spraying
- open equipment
- powder products - Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- application
- on-line
- dipping
- liquid coatings - Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application
- fluidised-bed
- automatic
- or
- enclosed - Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application
- fluidised-bed
- manual
- or
- open - Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application
- aerosol dispensers - Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- film formation
- stoving (>100°C) - Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- film formation
- UV/EB radiation curing - Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- application equipment cleaning
- open
- in situ
- indoor - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- application equipment cleaning
- open
- in situ
- outdoor - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- application equipment cleaning
- open
- off-line
- indoor - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- application equipment cleaning
- open
- off-line
- outdoor - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- application equipment cleaning
- enclosed
- in situ
- indoor - Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- application equipment cleaning
- enclosed
- indoor
- off-line - Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- laboratory use
- QC laboratory - Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- waste management
- storage of waste prior to removal for off-site management - Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- waste management
- transfer of process wastes to storage containers
- off-line
- in workplace - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Name:
- bis(2-(2-butoxyethoxy)ethyl) adipate
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- bis(2-(2-butoxyethoxy)ethyl) adipate
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Intermediates - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Use in rubber production and processing
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Use in rubber production and processing
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Material transfers; Closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Material transfers; Closed systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Material transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Bulk weighing; Use in contained systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Bulk weighing; Use in contained systems
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Small scale weighing
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering (including Banburys); Elevated temperature
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Pressing uncured rubber blanks
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Vulcanisation; Elevated temperature
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Cooling cured articles. Elevated temperature.
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Production of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Equipment cleaning and maintenance
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Use in Cleaning Agents GEST4_I - Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping automated and by hand). GES4_P
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- (Industrial) Use of lubricants in high energy open processes
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Fill bath with fluid
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Metal machining operations, e.g. drilling, grinding etc (giving risk to mist)
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Use of high speed machinery (not MWF uses) - open systems giving rise to mis
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Use of high speed machinery (not MWF uses) - open systems giving rise to mis
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Name of activity / technique:
- Automated metal rolling / forming
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Semi-automated metal rolling / forming
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Draining, maintenance & cleaning of equipment
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Polymer processing GEST23_I
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Polymer processing GEST23_I - Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance. GES23_I
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Transfer and dilution of concentrated product by using dedicated dosing system; medium RMM
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Transfer and dilution of concentrated product by using dedicated dosing system; no RMM
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Use in a closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Use in a closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Automated task; Semi-automated task; Dedicated equipment; no RMM
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Automated task; Semi-automated task; Dedicated equipment; medium RMM
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial spraying; Automated task; Open systems; Long term; with LEV
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial spraying; dilluted product; Automated task; Open system; Long term; high RMM
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial spraying; Automated task; Open system; Short term; medium RMM
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial spraying; Automated task; Open system; Long term; medium RMM
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial spraying; Automated task; Open system; Long term; no RMM
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Brushing; Automated task; no RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; with LEV
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; high RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; medium RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; no RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Inclusion in Matrix) - Roller application etc. : Polymer preparations
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- textile application: calendering
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Calendering operations: non processing agents
- Process category (PROC):
- PROC 6: Calendering operations
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application - Changing of containers, drums or buckets for industrial application equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application - Industrial use of adhesives
by roller and brushing with manual application
indoor, with LEV - Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Manual Industrial application of adhesives and sealants by roller or brushing application - Industrial use of adhesives
by roller and brushing with manual application
indoor, without LEV - Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- (Industrial) Use of lubricants and greases in open systems.
ATIEL-ATC Group C [i] - Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Manual filling of lubricant container, i.e. bath or tank
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated filling of lubricant container, i.e. bath or tank
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Automated filling of lubricant container, i.e. bath or tank
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated roller application or brushing of coatings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Draining, maintenance & cleaning of equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids and solids via pipeline from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: closed process (with sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - closed process (sampling)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: Incineration on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Storage and delivery of finished products: in bulk and packaged goods, indoor and outdoor
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: closed continuous process (with sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Stripping: closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Mixing, blending, completion: closed continuous process (sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment cleaning: enclosed in situ in workplace or off-line in workplace
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: closed batch process (with sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Stripping: Destillation - closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Mixing, blending, completion: closed batch process (sampling)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – enclosed dedicated lines
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: storage of waste prior to removal for off-site and/or on-site treatment
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Receipt and storage of raw materials : bulk raw material and packaged goods delivery - indoor and outdoor
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: batch or other process (with sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Polymerization: mixing, heating,cooling - batch or other processes (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Mixing, blending, completion: batch process (sampling)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment cleaning: open in situ or open off-line in workplace (includes replacing filters during filtration)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids or solids manually from bulk storage or packaged goods, also blending and dissolving of raw materials - indoor. open batch process (additions)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Blending/emulsifying: open batch process (with sampling)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: waste water treatment on site
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Raw material assembly and charging: raw material dispensing of liquids and solids manually from bulk storage or packaged goods - indoor and outdoor
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Waste management: transfer of wastes to tanks and storage containers: off-line in workplace
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Manufacturing equipment maintenance: opening of manufacturing equipment and pipework containing chemicals for repair or cleaning manufacturing equipment for maintenance purposes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Filtering and filling: filtration, centrifugation, sieving and filling – batch or other processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- EPDLA - Manufacture of aqueous polymer dispersions and dispersion powders - Use of Process Regulators for Polymerisation - Laboratory use: QC & RD laboratory use
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant