Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 200-471-4 | CAS number: 60-34-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Hydrolysis
Administrative data
Link to relevant study record(s)
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Does not correspond to hydrolysis but to oxidative degradation. Non GLP, non guideline study, but in-depth investigations which are relevant for risk assessment of environmental hazards and exposures.
- Qualifier:
- no guideline available
- Principles of method if other than guideline:
- Investigates oxidation in water as a function of pH, dissolved oxygen and metallic divalent ion (Cu2+) concentrations.
- GLP compliance:
- no
- Remarks:
- prior to GLP
- Radiolabelling:
- no
- Analytical monitoring:
- yes
- Estimation method (if used):
- The consumption of oxygen was measured by a dissolved oxygen monitor (Yellow Springs International model 53).
UV spectra were recorded on a Cary 14 spectrophotometer and HPLC analyses were performed on a Waters M6000A instrment with µC 18 Bondapack as the stationary phase and 99% (1% acetic acid in water) - 1% acetonitrile as the mobile phase.
GC measurements were conducted on a Hewlett Packard 5730A FID chromatograph - Transformation products:
- yes
- No.:
- #1
- No.:
- #2
- No.:
- #3
- Validity criteria fulfilled:
- not applicable
- Remarks:
- not a standard assay
- Executive summary:
The rate (amount per min) of MMH aqueous degradation due to oxidation by dissolved oxygen increases with:
- increasing water Cu2+ levels (acts as a catalyst; major effect),
- increasing water pH (moderate effect).
It is unlikely that these materials will be present for longer than one or two days in non-acidic waters.
The degradation products are formaldehyde and hydrazine.
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Does not correspond to hydrolysis but to oxidative degradation. Non GLP, non guideline study, but in-depth investigations which are relevant for risk assessment of environmental hazards and exposures.
- Qualifier:
- no guideline available
- Principles of method if other than guideline:
- Investigates oxidation in water as a function of pH, dissolved oxygen and metallic divalent ion (Cu2+) concentrations.
APHA, AWWA, and WPCF: Standard Methods for the Examination of Water and Wastewater. 12th ed. American Public Health Assn., Inc., New York, 1965. - GLP compliance:
- no
- Remarks:
- pior to GLP
- Radiolabelling:
- no
- Analytical monitoring:
- yes
- Estimation method (if used):
- Various physical properties, phenolphthalein and total alkalinity, pH, specific conductance, water hardness, and dissolved oxygen were examined immediately following preparation of fresh solutions and at the same time each day for 4 days. More frequent measurements were made to assess the effects on the oxygen content of water and to some extent chemical stability in the test solution.
- Details on test conditions:
- Hard water:
- origin: supernate of raw ground water allowed to stand for one week for sedimentation
- characteristics: pH of 7.8 to 8.2, dissolved oxygen (DO) of 6.9 to 7.8 mg/L, hardness (EDTA) of 400 to 500 mg/l as CaCO3 , specific conductance of 700 to 870 µmho/cm, total alkalinity of 185 to 232 mg/l as CaCO3.
- composition: no detectable amount of chlorine, copper or iron (copper shown to cause appreciable degradation)
Soft water:
- origin: prepared just before use by making a 1:20 dilution of the hard water with distilled water containing no detectable Ca, Mg or Cu.
- characteristics: pH of 6.3 to 6.9, hardness of 20 to 25 mg/l, DO of 6.9 to 7.8 mg/l, specific conductance of 50 to 65 µmho/cm, alkalinity of 16 to 18 mg/L.
MMH was made into hard water (HW) and soft water (SW) solutions at final concentrations ranging from 100 to 0.1 mg/l, in 2L.
Two liters each of hard and soft water served as controls. - Duration:
- 4 d
- Negative controls:
- yes
- Remarks:
- see above
- Details on results:
- - Only MMH in hard water at a concentration at or above 1 mg/l showed some degree of turbidity.
- No noticeable change in temperature (> 0.5°C) of any of the chemical solutions.
- NB: Hydrazine was very stable in soft water but less so in hard water over 4 days.
- MMH did not affect phenolphthalein alkalinity, but at 100 mg/l caused a 7-fold increase in total alkalinity in soft water and little or no increase in hard water (in which binding with calcium and other ions occurs).
- MMH produced an appreciable increase in pH in both hard and soft water only at 100 mg/L; in soft water the values decreased a little along time. Minimally larger increase in pH in soft water than hard water (buffering action of hard water).
- MMH at 100 mg/l produced a significant increase in the specific conductance in soft water but a slight reduction in hard water.
- EDTA hardness: small decrease at the 100 mg/l level in hard water only (suggests appreciable coordination or binding to calcium ions)
- Dissolved oxygen: MMH at 100 mg/l caused a reduction in the DO level, greatest in soft than hard water (5.0 vs. 6.2 mg/l at 24 h) throughout the test period but mainly during first 24h. - Validity criteria fulfilled:
- not applicable
- Remarks:
- not a standard assay
- Executive summary:
MMH is more stable in soft water than hard water due to the various ions present. Low concentrations up to 1.0 mg/l had no significant effect on any of the parameters evaluated. The 100 mg/l concentration level produced a relatively greater effect on total alkalinity, pH and specific conductance in soft water than hard water, along with a small drop in EDTA hardness over time in hard water only, indicating that MMH coordinates with calcium and other ions present in hard water. A decrease in the oxygen content occured at 100 mg/l within the first 24 hours, especially in soft water.
Hydrazine, a possible degradation product of MMH, was shown to be quite stable over 4 days in preliminary assays.
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Non-GLP, non-guideline study. Water DT50: relevant for BPT assessment and seem reliable although some data are missing. Soil data: not reliable based on minimal or aberrant recoveries.
- Qualifier:
- no guideline followed
- Principles of method if other than guideline:
- Decomposition rates of MMH in aqueous environments (distilled, seawater, and freshwater) were determined.
Soil percolation and decomposition studies. - GLP compliance:
- no
- Remarks:
- prior to GLP
- Radiolabelling:
- no
- Analytical monitoring:
- yes
- Details on test conditions:
- Water:
Natural waters used in these studies were obtained from a freshwater pond on Tyndall AFB, FL and from the Gulf of Mexico. Filtered through Whatman filter paper for each study.
Cleaned to remove organic material, rinsed with deionized, distilled water, soaked in a 50-percent solution of nitric acid, and again rinsed with deionized, distilled water. Without cleaning, randomly accelerated legradation rates were observed, possibly the result of trace metals which catalyze the breakdown.
MMH test concentrations: 0.1% and 0.05%., studied at room temperature.
Soil:
Four soils (sand, clay = acid soil, organic, Vandenberg Air Force Base soil). - Transformation products:
- not specified
- DT50:
- >= 13 - <= 18 d
- St. dev.:
- 2
- Type:
- (pseudo-)first order (= half-life)
- Remarks on result:
- other: total degradation (not only hydrolysis), pond water
- DT50:
- >= 13 - <= 24 d
- St. dev.:
- 9
- Type:
- (pseudo-)first order (= half-life)
- Remarks on result:
- other: total degradation (not only hydrolysis), seawater
- Validity criteria fulfilled:
- not applicable
- Remarks:
- missing data, non standard assay
- Executive summary:
Water DT50 (pseudo-first order):
At room temperature, unknown pH (most likely neutral, based on water sources and neutral pKa of MMH): MMH's DT50 range of means was 13 -24 days in pond water and sea water.
Soil (non reliable data):
There was no single dominating process; both chemical decomposition and physical adsorption were important in fuel-soil interactions.
Referenceopen allclose all
The kinetic reaction contains a copper ion-catalyzed as well as an uncatalyzed component: kobs = k1 + k2 * [Cu2+], with [CU2 +] in g/mol at a given pH:
- at pH 7.0: k1= 6.68 E-4 /min; k2 = 1.20 E+3 /(g/mol)/min
- at pH 9.2: k1= 6.94 E-3 /min; k2= 1.81 E+3 /(g/mol)/min
At null [Cu2 +] level, the overall rate constant is approximately 7 E-3 /min (extrapolated) or 5.64 E-3 /min (measured).
At [Cu2 +] up to 1E-6 g/mol, the overall rate is similar at neutral and alcaline pH (7.0 and 9.2).
At higher [Cu2 +] up to 1E-5 g/mol, the overall rate gets up to 3-fold higher in alcaline than neutral water.
No UV-absorbing degradation products were detected.
Chromotropic acid revealed formation of formaldehyde, at around 30% with little dependence on [MMH] or [Cu2+].
Also hydrazine is expected to be formed, see attached picture.
Soil: in sand, 0% adsorbed and/or decomposed, 3% extractable by HCl, all the rest was not recovered. In all other soil types, about half of the amount was adsorbed and/or decomposed. Data were unclear with some totals >>100% and some other with minimal recovery.
Description of key information
Relevant data were available to fulfil that endpoint, even if they do not strictly correspond to hydrolysis (reaction with water), but to oxidation (dissolved oxygen). In water, oxidation is catalyzed by dissolved divalent metals, and leads to quick degradation. Furthermore, pseudo-first order DT50 was experimentally determined in water and the range of means was 13-24 days, for pond water and sea water combined. These data are much more relevant for risk assessment (incl. persistence assessment) than simple hydrolysis as a function of pH (a test in which dissolved oxygen and metals do not have to be detailed). Hydrolysis testing as a function of pH would not give any useful data for classification either.
Key value for chemical safety assessment
Additional information
The studies on degradation in water are summarised in the following table:
Method |
Results |
Remarks |
Reference |
Decomposition rates of MMH in aqueous environments (distilled, seawater, and freshwater) were determined. also: Soil percolation and decomposition studies. |
Half-life (DT50): t1/2: >= 13 to <= 18 d; Type: (pseudo-)first order (= DT50) (total degradation not only hydrolysis, pond water) t1/2: >= 13 to <= 24 d; Type: (pseudo-)first order (= DT50) (total degradation not only hydrolysis, seawater) Soil data: not reliable, ignored |
2 (reliable with restrictions) key study experimental result Test material (EC name): methylhydrazine |
Braun BA, Zirrolli JA (1983) |
Investigates oxidation kinetics in water as a function of pH, dissolved oxygen and metallic divalent ion (Cu2+) concentrations. The consumption of oxygen was measured by a dissolved oxygen monitor (Yellow Springs International model 53). UV spectra and GC measurements were conducted |
The rate (amount per min) of MMH aqueous degradation due to oxidation by dissolved oxygen increases with: - increasing water Cu2+ levels (acts as a catalyst; major effect), - increasing water pH (moderate effect). MMH not expected to stay for longer than one or two days in non-acidic waters. Degradation products are formaldehyde (around 30% of original MMH amount) and hydrazine. |
2 (reliable with restrictions) Supporting study experimental result Test material (Common name): Monomethylhydrazine hydrochloride |
Sikka HC, Banerjee S, Appleton HT (1979) |
Investigates consequences of MMH introduction on water characteristics, and MMH stability. APHA, AWWA, and WPCF: Standard Methods for the Examination of Water and Wastewater. 12th ed. American Public Health Assn., Inc.,, 1965. Various physical properties, incl. water hardness, and dissolved oxygen were examined for 4 days after MMH introduction. |
MMH more stable in soft water than hard water due to the ions present. In hard water MMH reduces EDTA hardness, indicating coordination with calcium and other ions. In soft water MMH consumes oxygen, indicating MMH oxidation.
|
2 (reliable with restrictions) Supporting study experimental result Test material (EC name): methylhydrazine |
Slonim (1975) |
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
