Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General information:
In case of accident or if you feel unwell seek medical advice (show label or SDS where possible).

Inhalation:
In case of breathing difficulties, leave/move the victim outside the hazardous area to allow for fresh air. In case of respiratory failure, perform
artificial respiration (preferably mouth-to-mouth breathing). Keep the victim in a warm, quiet place. Treat all symptoms. Get medical attention
immediately.

Skin contact:
Remove contaminated clothing and shoes. Wash affected area with soap or mild detergent and large amounts of water until no evidence of chemicals
remains.

Eye contact:
Wash eyes immediately with large amounts of water or normal saline, occasionally lifting upper and lower lids, until no evidence of chemical remains.
Get medical attention immediately.

Ingestion:
No specific antidote. Immedtiately drink water (2 regular glasses at most). Treat symptomatically and supportively. Get medical attention immediately. If vomiting occurs, keep head lower than hips to prevent aspiration.

Fire-fighting measures

Protection against Fire and Explosions:
Negligible fire hazard when exposed to heat or flame. No risk of explosion.

Suitable Fire Extinguish Media:
Foam, carbon dioxide or water spray.

Non suitable Media:
None.

Special Exposure Hazards:
None.

Special protective equipment for fire fighting:
Use respiratory protection independent of recirculated air.

Accidental release measures

Personal protective equipment:
Wearing splash-proof or dust-resistant safety goggles is highly recommended.

Environmental protective measures:
Non toxic product. Biodegradable. Avoid spilling product in sewage system. If large quantities of product are discharged in water streams or to a
waste water treatment station, the ecosystem or the waste water treatment plant may experience disruptions owing to the high COD levels required
to cause product degradation. addionally, limited effects might occur due to high pH before being diluted.

When the product is in solution:
For small spills, take up with sand or other absorbent material and place into containers for later disposal. For larger spills, dike far ahead of spill
for later disposal.

Product in its solid form:
Sweep up (e.g. shovel preferable made of plastic and broom), place in a bag and hold for waste disposal. Clean shovel and broom after usage.

Handling and storage

Storage at normal temperatures, in a dry place.

Can be kept in the closed original package for 2 years. Must be used rapidly after opening of the package. Must not be stored in the vicinity of
aromatic materials.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated for transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Industrial hygiene
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
- Ventilation:
As for any material which may generate dusts during handling or mixing, provide local mechanical exhaust or general dilution system.

Personal protection
- Respirator:
None if the local is equipped with appropriate mechanical exhaust or general dilution system. If high levels of dusts generated, paper masks or
self-contained breathing apparatus. Recommended filtre type: filtre P 1 (according DIN 3181) for solid particles of inert substances, or equivalent filtre type.
- Hands and body:
No particular clothing.
Hand protection when in full contact:
Glove material: Nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min
Hand protection when in splash contact:
Glove material: Nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min
- Eyes:
Not necessary if the local is equipped with appropriate mechanical exhaust or general dilution system. If high levels of dust are generated,
dust-resistant goggles advised.
- Hygiene measures:
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.

Stability and reactivity

This preparation is stable under normal condition of use.

Thermal decomposition: None.

Hazardous reactions: None.

Hazardous decomposition products: None.

Disposal considerations

Waste disposal:
Disposal in accordance with the current local/national regulations.